Traditional Culture Encyclopedia - Traditional culture - How to connect amplifier with speaker

How to connect amplifier with speaker

Question 1: How do I connect my amplifier to my speakers? 5 points Your speaker wiring seems to be a bit short-circuited; the stamen will be stripped longer, the speaker four interfaces, the left upper and lower two points connected together, the right upper and lower two points are also connected together, so that a speaker connected to the two wires (positive and negative poles).

The amplifier is connected to the wrong, should be connected to the main sperkers on this port, R is the right speaker, L is the left speaker, red is connected to the positive speaker, black is connected to the negative speaker.

Problem 2: how to connect the amplifier connected to the sound connection First of all, look at the back of the amplifier in Chinese or English labeling, Pentium home theater amplifier, for example, FR on behalf of the front right main speaker, FL on behalf of the front left main speaker, SR on behalf of the right surround speaker, SL on behalf of the left surround speaker, CEN on behalf of the center speaker. The corresponding connection to the speakers can be connected to the speaker cable red to the positive pole, white to the negative pole. TV output or set-top box output can be connected to the red and white audio cable to the amplifier ipod\TV can be connected to DVD or other devices can be connected to DVD/CD can also be connected to Bluetooth, SD card, USB and so on.

Home theater tuning to Pentium audio as an example try to be divided into the following five aspects.

First; audio input adjustment; amplifier remote control below the DVD \ CD, IPOD \ TV, 5.1CHIN.USB, SD, FM you can press the appropriate key you can put out the sound you want.

Second; volume adjustment; this is relatively simple press VOL + sound big, press VOL - sound reduced.

Third; sound channel adjustment; CH-MODE press this key to select 2-channel or 5-channel

Fourth; bass and treble adjustment; TRE + TRE - these two keys control the treble, BASS + BASS - these two keys control the bass.

v; microphone adjustment; MIC-VOL for microphone volume, M.TRE for microphone treble, M.BASS for microphone bass, M.ECHO for microphone mix

Question 3: How to connect this amplifier to the speakers The coaxial ports in the top row of the 2nd picture from the 2nd to the 6th group are connected to the music input signals, and the 1st group of RECs can be connected to the The first group of RECs can be connected to the recording device, not the signal input port.

In the third picture, the upper 4 groups of terminals are the main channel output, L is the left, R is the right, the power is the largest two groups of output channels in the amplifier, connect the two speakers on the line. The red color connects to the positive pole of the speaker, and the black color connects to the negative pole. The bottom left output is center center output, the bottom right is sur surround output, connect the speakers with the same method as the main channel.

The fourth picture is just the power connector.

The maximum power of this amplifier is 100W, and the impedance is 8 Ohm.

Question 4: How to connect the amplifier to the stereo DVD player Audio out Connections Amplifier Audio in L and R L is the left side (white plug) R is the right side (red plug) This is the red and white wire connection you said

There is also a video (Video) yellow DVD player Video out Connecting the TV (monitor) Video in

Amplifier connected to the speakers L left speaker R right speaker each divided into + positive - negative pole amplifier connected to the speakers positive and negative poles do not connect the wrong on it

Speakers have 4 you can be divided into 2 groups to connect a group of two speakers Parallel connection on it

Question 5: How to connect the amplifier to the stereo should be connected to the speaker,

The amplifier should be connected to the speaker,

The amplifier should be connected to the speaker,

The amplifier should be connected to the speaker,

The amplifier should be connected to the speaker.

Question 5: How to connect the amplifier to the stereo should be connected to the speakers,

not the stereo.

Directly connected

on the line.

Question 6: How to connect the computer amplifier? Amplifier how to connect speakers? Look at your picture, first of all, your computer output should be 3.5 jacks, you have to use a 3.5 plug on one end, the other end of the two Lotus plug (that is, the red and white) of the connecting cable, and then the red and white two plugs in the back of the amplifier at any corresponding to the two red and white sockets, generally plugged into the LINE port, and then the speakers of the two big boxes connected to the 1, 4 and 2, 2, 5, another horizontal speaker connected to 3, 6. Just loosen that red black knob, then straighten out the audio wires, *** go ahead and tighten the knob again. The problem with attention is that when connecting these to turn off the computer and amplifier power, all connected to the volume to the minimum, boot, play gradually turn up the volume on it.

Problem 7: amplifier and speaker connection method To be honest, this amplifier is not suitable for pushing your speakers, your is a mono three-channel constant voltage broadcasting merged amplifier,

can be connected to the two try to listen to the amplifier's 8-ohm, the negative connection

70V or 100V is connected to the fixed-voltage broadcasting speakers (fixed-voltage speakers above the transformer)

Question 8 DVD: How to connect the amplifier, amplifier how to connect the speakers? DVD player audio output (Audio out) connected to the amplifier audio input (Audio in) divided into L and R L is the left (white plug) R is the right (red plug) This is what you said that the red and white wire connection

There is also a video (Video) yellow DVD player Video out connected to the TV (monitor) Vido in

The amplifier is connected to the speakers L left speakers R right speakers each divided into + positive - negative amplifier connected to the speakers positive and negative poles do not connect the wrong on it

Speakers have 4 you can be divided into 2 groups to connect a group of 2 speakers parallel line can be

Question 9: How to connect the cell phone and the sound? How do you connect a cell phone to a stereo and an amplifier? The phone and how to connect the sound and the amplifier? Buy a 3.5 to Lotus plug input cable, 3.5 plug into the cell phone earbud hole, Lotus plug into the amplifier input port (IN), the speaker connected to the amplifier speaker output (L/R OUT)

Question 10: how to connect the amplifier interface computer in are input, out are output, mic city phone through the input