How to pull out the plug of the washbasin?

There is a plug at the drain of the washbasin, through which we can store the water in the washbasin or drain it. Sometimes we need to unplug the washbasin, so how to unplug the washbasin?

First, how to unplug the plug of the washbasin

1. Press the plug of the washbasin with your fingers to make the plug stand up, then hold the standing side of the plug with a wrench and pull it out.

2. After turning the plug of the washbasin upside down, we put a rope through the hole on one side of the plug and then through the hole on the other side of the plug. Everyone grabs both ends of the rope and pulls it out.

3. We will flatten the plug of the washbasin, then suck the plug with a suction cup, and pull the suction cup up hard, or we can pull the plug out.

4. You can also insert a screwdriver under the lid, pry open the lid of the washbasin with a screwdriver, and so on.

Second, the toilet washbasin is blocked?

1, the water leakage in the washbasin may be caused by a large amount of hair accumulated in the washbasin drainer. We can clean the hair on the washbasin surface first. Then we bend one end of the wire into a hook, put the hook into the sink and hook out the sundries inside. You can also cut the two sides of the plastic straw into inverted forks with scissors, and then put the plastic straw into the drain to take out the blockage.

2, the washbasin is blocked, we can unplug the washbasin plug, and then pour baking soda powder and white vinegar into the sewer in turn, and the reaction of the two can also clear the blockage in the pipeline. Or we can pull out the drain pipe of the washbasin from the ground drain, put the spring of the pipe dredge into the drain pipe, and dredge the blocked pipe.

I have already introduced to you how to unplug the washbasin. I hope I can provide you with reference and help.