Wooden floor painting arc method

There are many ways to draw the arc of a wooden floor, the following are some common methods:

1. Use the arc mortise and tenon method: first of all, in the floor to draw the arc to determine the center of the circle and the radius of the arc, and then use the woodworking machine to cut the floor into an arc. Then, at the edge of the arc with a tongue and groove planer or tongue and groove machine to make the arc tenon, the two arcs of the floor can be spliced together.

2. Draw the arc with drafting tools: Measure and mark the radius and center of the arc on the floor with a ruler and pencil, and then draw the arc around the center of the circle with a thin pencil or silk thread. Next, use a saw and sandpaper to cut and sand the floor into the desired arc, and finally put the arc together.

3. Use wooden sheet: First cut the floor to be curved into the desired shape, then draw the shape of the arc with a pencil on the wooden sheet and fix the sheet to the curved floor according to the marked position. Next, use a saw and sandpaper to cut the curved floor flat and glue the sheet to the floor, and finally sand it to become one piece.

4. Use the arc template: First, draw the desired arc shape with paper, then cut it out as a template and mark it on the floor according to the shape of the template. Next, use a saw and sandpaper to cut and sand the floor into the desired arc shape and splice the arcs together.

Overall, there are many different ways to paint a curved floor, and the method you choose will depend on the material of the floor, the requirements, and your skill level. It is important to note that you should always be safe and careful when carrying out any carpentry work.