How to make banyan bonsai out of stone?

Choose relatively independent ornamental stones with many gaps and good posture, such as sea mother stone, stalactite, axe stone, Yingde stone, etc. Choose a banyan tree, remove the pot and soil, and put it in the pot. The root is bare.

Shangpen

Fix the selected stones at the bottom of the basin with cement or glue. Remove flowerpots and soil from selected banyan trees and cut off excess roots. The roots of the banyan tree are embedded in the cracks of the stone and fixed with hemp rope to make it closely combined with the stone. Fill the flowerpot, and the roots that cannot be covered by soil surface can be covered with plastic film and hard paper before covering the soil. After planting, pour water, wet the stone, put it in a semi-shade, and replenish water according to the dry and wet conditions of the basin soil. /kloc-After 0/0 days, move to the sun for normal maintenance. Be careful not to touch or burn the exposed roots, causing local defects. Half a year or so, the bonsai with stones can be finalized.

systems modelling

Cliff type: the stone stands in the basin, the banyan tree is planted 2/3 away from the basin surface, or directly on the top of the stone, and the trunk hangs down and floats downward. Bouldering: the stone is high or low, so that the root can hold the stone tightly. Tall stones are thinner and steeper, short stones are stout, and the branches on the stones are short and strong, as steady as Mount Tai. They are interdependent, which embodies the natural beauty of roots.