The easiest way to cut clothes

The easiest way to cut clothes is as follows:

Tools / raw materials: scissors, fabrics, blouse cutting method: blouse cutting formula for the half-shoulder for one-half of the shoulder width, horizontal collar for the half-shoulder one-third of the lapel, turn-up collar for the collar one-fifth of the size of the sleeve cage depth of one-fifth of the bust and then minus five points, the chest of the chest fat for the bust of one-third of the fat one-half of the sleeve cuffs.

With the paper pattern cutting clothes pants method is as follows: the first with an iron to the fabric ironing, so that the fabric stretch without wrinkles, if the paper pattern is also wrinkled, at the same time with an iron.

Flatten the fabric, the paper sample covered in the fabric, it is best to use the hanging object pressure, lay the case as far as possible rely on the edge, and at the same time pay attention to the orientation of the cloth silk, do not have to diagonal grain, as far as possible under the circumstances of the discharge of the compact.

Subsequently, the embryo is not to the fabric tone of the scratch powder, along the edge of the paper pattern drawing the paper pattern corridor. Before cutting the fabric, check if 2 front pieces and two back pieces, and then cautiously cut the fabric along the chalking line. In addition cut a waistband, placket, fabric patch, etc., jeans cut is completed.

A good fit should be good, and all the lines of the garment should look smooth and natural. Collar folded to be exactly the same, there can be no deformation of the condition of the clothes hanging sleeves are exactly the same, there is no front and back to eat the momentum of uneven conditions

All the seams neat, even and straight stitches, no skipping stitches, broken thread, heavy running thread; clothing hem, skirt and other balanced, placket, stacked doors are not separate or cross

All the pleats are uniform. No obvious size; pocket size and location of uniform; garment fabric pattern is neat; lining color and fabric matching; lining and surface should be flat, no bulging, creasing. Whether the stitching is firm; whether the lining is exposed; the general stitch length of a well-made garment is 3cm 13-14 stitches; the fabric splicing should be warp and weft