How to clean the household radiator?

1. In order to ensure safety, it is necessary to close the backwater valve and gently unscrew the plug of the radiator with a wrench. Rubens radiator professionals warmly remind everyone that some water will flow out of the radiator after unscrewing. You can put a basin of water under the radiator to avoid wetting the ground.

2. Rinse the radiator, open one of the temperature control valves to rinse the radiator, close the temperature control valve until the water flowing out is clear, tighten the plug, and then open the water inlet and return valve to exhaust; If the installation mode is that the radiator enters and exits from below, open the flexible joint between the valve and the heater for flushing; The bathroom radiator in the bathroom needs to unscrew the exhaust valve at the top of the radiator and open the valve to flush directly.

3. Clean the outside of the radiator. Different radiators have different cleaning methods. For example, the steel column radiator is easy to clean, and the surface can be wiped with a towel. The space between two adjacent rows is relatively small, so you can dip the feather duster into the heating gap, pull it back and forth like a saw, and wash the duster with water in time, and repeat the action to make it clean. The gap of copper-aluminum composite radiator is small. You can use discarded telephone lines, shoelaces, strings, etc. Tie a wet rag on one side and slowly pull the rag through the gap at the other end, and the radiator will be clean soon.