How to use the sea pole wheel

1. Loosen the reel base on the sea pole, then clamp the rotary reel into the reel base and lock the reel base.

2. Thread the fishing line in the line cup through the line throwing frame.

3. Turn on the check switch on the reel so that the wire cup can rotate freely.

4. Pass the fishing line through each guide hole of the sea pole in the correct order.

5. Turn off the check switch

6. Connect fishing groups such as lead weights and hooks at the end of the fishing line and install bait.

7. Press the fishing line in front of the reel on the fishing rod with the thumb of the right hand, and hold the tail end of the rod handle with the left hand after opening the throwing frame. Move the fishing rod back with both hands and chop it forward hard. When the pole tip moves forward at an angle of about 45, release the fishing line pressed by the right hand and throw the fishing group to the fishing point dozens of meters away. Beginners can practice many times in the open field, and then master the skills to make accurate throwing. )