How to clean up the blockage in the drainage system of Haier washing machine

Haier washing machine drainage system blockage cleaning method is as follows:

1. First, we need to open the back panel of the washing machine, remove the screws with a screwdriver and pry them open. Next, check whether the drain pipe is blocked. If not, the drainage hole of the inner cylinder is blocked, and the next step is needed!

Next, you need to open the top cover of the washing machine. Some washing machines have four screws on the top cover, and different models may be different. Be careful not to miss them when disassembling!

When we open the top cover of the washing machine, we will begin to disassemble the inner cylinder of the washing machine. First, remove the fixing screw connecting the upper inner cylinder and the outer cylinder with a screwdriver. There are usually four washing machines. Then remove the fixed cross screw at the bottom of the inner cylinder, and then remove the bottom cover of the inner cylinder.

4. After removing the bottom cover, you can see that there are four hexagon screws under the bottom cover, which can be removed with a wrench or socket wrench!

5. At this point, the inner steel barrel of the washing machine has been completely separated from the outer plastic barrel. At this time, we need to grasp the edge of the inner barrel upwards and shake it out gently. At this time, you will see the drain hole under the outer tub of the washing machine. Sometimes the washing machine can't discharge water because some dirty magazines block up the holes.

Causes of blockage of drainage pipe of washing machine

1, the water seal of the washing machine is aging, and the water inside the washing machine cannot be effectively sealed. Causing water to flow out. Causing pipeline blockage. This situation generally occurs in washing machines with long service life.

2. The drain pipe is blocked by foreign objects, such as hair and other dirty things at the outlet. This situation is generally caused by the user's inattention to hygiene during use.

3. The drain pipe itself is damaged, causing pipeline blockage, which is usually caused by long-term use or careless maintenance.