Traditional Culture Encyclopedia - Traditional culture - How to make a stove for roasting whole sheep with gasoline cans

How to make a stove for roasting whole sheep with gasoline cans

1, ready:

Clean the remaining honey in the bucket first, and then brush the inner surface of the empty bucket. Then I borrowed a grinder from a friend and cut a big hole in the empty bucket.

Using an empty food-grade bucket as a barbecue grill can reduce a lot of trouble.

2, making a bracket

Six fences were cut down, two of which were used to support buckets and four were used to make grill legs.

I hope this grill is easy to disassemble, so the best way is to put the bucket on the shelf, two fences support the empty bucket, and the other four fences are bolted to the holes at both ends. In order to make the support strong enough, some plywood was used to reinforce it. When it is all finished, you can see the empty bucket standing proudly on the shelf.

3. lid and barbecue grill

A bracket is installed in the barrel to support the barbecue grate and prevent the lid from falling into the barrel. The lid and bucket are hinged. In the lower part of the barrel, there is also a grid for placing carbon blocks and promoting air circulation.

Fourth, light a fire in an empty bucket.

Light a fire in the bucket and burn all the paint on it. Paint and other unknown things. I'm not sure if there is a rule against burning things on this day, so I made some hamburgers in the gas stove to fake the smoke source.

Verb (abbreviation for verb) dressing factory

The last step in making a barbecue grill is to add handles (made of logs bought from hardware stores), vents and thermometers. I'm also going to spray high-temperature resistant paint on the barrel, which will not only paint the barrel with my favorite color, but also help prevent the barrel from rusting.

Extended data:

Introduction of dimensions and materials of barbecue grill

20 1 stainless steel barbecue grill

Size (length * width * height): 48.5cm*33cm*28cm.

Material: all made of high-quality stainless steel, instead of ordinary stainless steel that is easy to rust in the market. The advanced processing equipment in Taiwan Province Province is not up to the standard of ordinary processing functions. Advanced polishing equipment and first-class polishing technology make the product surface as bright as silver, smooth and feel.

Outdoor portable stainless steel barbecue grill, pot rack, stove rack.

Size (length * width * height): 37cm*24cm* 12cm.

Material: all made of high-quality stainless steel, foldable design, easy to carry, suitable for indoor and outdoor use.