What are the skills and precautions of ancient wall tiles in Jiangsu?

? I think everyone should know that the tiles on the wall are very good wall decoration materials. At present, the brands, types, styles and colors of wall tiles on the market are dazzling. Compared with the simple putty powder brush in the past, it will be more beautiful to stick bricks on the wall. Then, for the construction technology of ancient wall tiles in Jiangsu, everything is strange. Now let Bian Xiao give you a good introduction.

1, building preparation

Basic treatment should be done first in the construction of ancient wall tiles in Jiangsu Province. It is best to clean up the residual grease on the surface of the base with a wire brush; If there are obvious points on the surface of the base, cement mortar 1: 3 must be used to smooth or flatten it; However, the surface is painted, so it is recommended to use washing materials to remove the paint.

Step 2 soak in water

Before using cement mortar to cover the glass surface, it should be cleaned first, and then the tiles on the wall should be soaked in clear water for at least 2 hours. After that, the wall tiles must be removed and used in the shade. They shouldn't be submerged in water.

3. Prior agreement

Before the construction of ancient wall bricks in Jiangsu, they must be arranged in advance. When pre-arranging, it should be noted that there cannot be more than one row of residual bricks in the horizontal and vertical rows of the same wall. Incomplete bricks are incomplete bricks. Incomplete bricks should be arranged in the least eye-catching parts or internal corners to ensure the beauty of the whole wall.

Step 4 pave the way

Paving the road is the last step of brick surface technology. The story height needs to be leveled according to the standard horizontal internal line. Then cement and fine sand are mixed into the cement mixture according to the ratio of 1: 3 for construction; Knock down the vertical line with a hammer.

First, when the construction team sticks the tiles on the wall, it usually needs to scrape the putty off the wall. If putty is not a shovel, it is very risky to put tiles directly. Cement is very strong and can't be hung in putty, which will make the tiles fall easily.

Place tiles in advance before paving the compartment. If we wait for a certain result, and then find that the tiles are not good and the proportion is not harmonious, repaving will be eliminated, which will cause unnecessary waste and waste.

Second, the temperature, the tiles soaked in water can not be sold for the second time, and merchants do not accept returns. Therefore, when the wall tiles are flooded, it is necessary to ensure that the workers calculate the specific amount and then soak the water, so as not to cause too much waste.

Bian Xiao's conclusion: The above is an introduction to the construction skills and problems of ancient wall bricks in Jiangsu. In fact, the construction of ancient wall bricks in Jiangsu Province is not a very difficult thing, but we need to be more careful in the process of paving. A little carelessness will damage a piece. So in general, in order to ensure the perfect effect, you need to be very careful when placing it.