What's the name of the needle used for embroidery? Thread runs from the end of the needle into the needle.

This is called embroidery needle, which is an ancient embroidery technique. To finish embroidery, first stick the pattern paper on the reverse side of the base material, then embroider it from the reverse side with a hollow needle, insert it into the base material, and then return it, leaving a thread sleeve on the front side and sticking it one by one.

The penetration depth is consistent, the front pattern is neat and beautiful, and the front thread sleeve is generally around1mm. Change the color of embroidery thread in time according to the need of pattern color. After embroidery, wash off the pattern paper with clear water.

This embroidery technique is very old. There was a long or short curtain hanging on the door of the house at that time. As long as there is a TV or radio at home, it will be covered with curtains. "

Extended data

Flower-tying process

Acupuncture technique

There are many stitches in hand embroidery, which are constantly developing. The basic stitches are Qi Zhen, pine needle, cutting needle, needle roller, button needle, coil needle, winding needle, punching needle, fence needle, jewelry needle, silk needle and so on.

Qi Zhen

The needles are all on the outer edge of the pattern, and the flower lines are arranged evenly and neatly, neither overlapping nor showing the bottom. The lines can be vertical, horizontal or inclined as required. Qi Zhen is suitable for monochromatic flowers, and it is the most basic stitch of hand embroidery.

Loosening needle

Using equal length (generally about 5 mm) stitches, staggered arrangement, layered, staggered layer by layer, pin inlay. This kind of stitch is elastic, good at expressing the texture transition, color and light and shade of various objects, enhancing the three-dimensional sense, suitable for embroidering realistic color patterns, and is a common stitch in embroidery.

The first layer of embroidery, the stitches on the side should be neat and tight, and the length of the inside is different. The short needle is about three-quarters of the long needle. The second layer of embroidery thread is sleeved on the short needle of the first layer, and the third layer is sleeved on the long needle of the first layer.

Starting from the second layer, it is actually a thin needle, embroidered every other line, and so on. The final finished layer (embroidered edge) is the same as the beginning. The seam at the corner should be shortened appropriately, and the turning angle should not be too large to make it turn naturally.

Baidu encyclopedia-zhahua