How to remove the chandelier in the living room

1. Removal of the circular ceiling chandelier. To remove the circular ceiling lamp, turn off the power supply of the ceiling lamp first. Only by turning off the power supply can the safety of the disassembly process be ensured. Then, slowly unscrew the three small screws around the iron ring of the lampshade with a screwdriver, and then rotate the lampshade until it is unscrewed. Finally, remove the light bulb.

2. Dismantle the embedded ceiling chandelier. Actually, something is stuck in the embedded ceiling chandelier. As long as you are careful, you can find a safety clip stuck inside. Just break it off and cut off the power before you take it.

3. Remove the aluminum gusset ceiling lamp. Removing the aluminum gusset ceiling lamp is relatively simple. First, cut off the power supply, lift a corner from the seam edge of the aluminum buckle plate with a small screwdriver or a small thin blade, and remove the lampshade. Finally, pull down a small aluminum gusset plate in the same way and take out the light bulb.

4. Remove the rectangular ceiling chandelier. Rectangular ceiling lamps are relatively troublesome to disassemble. But the basic steps are similar. First, cut off the power supply and remove the lampshade. The lampshade of rectangular ceiling lamp should start from its four corners, and slowly pull down the aluminum alloy part on the side with the dish-washing hook of the glass-absorbing tray. Pay attention to pull at every corner until the lampshade is removed; Finally, remove the light bulb.