Manual beaded dragon baby frequency course

The frequency course of handmade beaded dragon baby is as follows: frequency course of handmade beaded dragon baby.

Tools/raw materials; Elastic rope, beads, pins, scissors

Methods/steps:

1. Fold the elastic rope in half first, then fold the guide in half and tie it to the elastic rope. Then string the beads in order. After putting them all on, take off the guide pin and thread the two wires at the tail into the circle at the head, as shown in the figure below.

2. Then move the beads to the head, two by two. Slowly, all the beads should be moved to the head. After continuing to move all the beads together, tighten the elastic rope before tying the knot.

The way to tie a knot is to make a circle and then go through it. Pay attention to tighten the elastic rope, and then tie a knot next to the beads. Cut off the extra thread and keep the thread end of 0.5 cm. Finally, the thread ends are pulled into the holes of the beads, and the distances between the beads are arranged to make them uniform and beautiful.

First, arrange two ropes in a straight line, one rope passes through the bottom, and put the right rope on the left middle rope.

2. Pass the crossed rope through the hole on the right from bottom to top, then tighten the ropes on both sides and repeat the previous steps in the opposite direction. Finally, put the crossed rope through the hole on the left from bottom to top, and tighten the ropes on both sides, so that a flat knot will be fine. Tie a flat knot at one end and put on accessories.

Third, when finishing, hook the left and right ropes into a flat knot with a crochet, stack the ropes at both ends together, and add a rope in the middle to weave a new flat knot to ensure flexibility.