Opening method of rural brick wall

Opening method of brick wall in rural areas;

1. To make a hole in the wall, you first need to determine the location of the hole. If it is a load-bearing wall, think carefully, and you must not smash the wall or make holes. If you have to open a hole, you need to do a good job of reinforcement in advance, report it to the property company, and even go through the examination and approval procedures of relevant departments before you can open a hole, otherwise it will easily destroy the structure of the house.

2. On the premise of permission, we will determine the location of the hole and arrange the holes through a diamond. In order to reduce the impact of dust on the staff, it is necessary to sprinkle water on the demolished part to reduce dust. In the process of construction, concrete and steel plates need to be polished.

3. Then determine the size of the door opening of the door frame, mark it on the wall, verify the designed mark, play the line, open it with a tool according to the played line, and finally set the door opening successfully.

Matters needing attention in wall cutting and opening doors

1, for the specific operation, it is necessary to prepare all the mechanical equipment and make an inventory of other tools. After use, check it regularly and do daily maintenance.

2, and the wall demolition, can be segmented, but can't use the method of vertical cross operation, the holes on the working face should be completely closed.

3. When the work on the day of opening the door for demolition is completed, it is necessary to keep the relevant equipment away from the demolition and keep a certain safe distance from other buildings.

4, the correct use of tools, to prevent dust workers, need to wear goggles and masks. In addition, it is necessary to control people, machines, materials, law and environment in order to ensure quality.