Resin clay layer

The course of extra-light clay fleshy kneading is as follows:

Material preparation: resin clay (material soil), ultra-light clay (yellow-green-white), toner, knife, white glue, small teacups, pebbles, hands and patience.

Operating steps:

The first step: color mixing, take a piece of resin mud, about 30 grams. Add a little yellow-green ultra-light clay, which can be added little by little and adjusted to a satisfactory color. Ultra-light clay really only needs a little, too much will make resin clay lose its transparency.

Step 2: Divide the clay into three unequal parts, because there are three layers of blades to be made.

Step 3: Pinch out the leaves. Rub a large portion of clay into strips, divide it evenly into eight portions, and put the other seven portions into bags or sealed boxes to prevent it from drying. Squeeze out one piece and take out another. The three layers of blades are eight, eight and three respectively.

Step 4: Color: Take a small brush, an eye shadow brush suitable for girls (as long as it is not wasteful), dip a small amount of toner in the sharp corner of the blade, and then smudge the color to form a natural transition. Everyone can do this, just like you paint eye shadow. ) The toner is like this.

Step 5: Assemble, take a small piece of ultra-light clay, preferably of the same color. Put four big blades in four positions: up, down, left and right. Then the other four pieces are glued in the gap with white glue, and so is the second layer. The third floor means the same thing.

Step 6: potting. Fill a small teacup with white ultra-light clay, spread a layer of pebbles (clay is sticky and does not need glue), then stick a small piece of clay at the bottom of the fleshy part and stick the fleshy part to the pebbles. It's done.