The brightness of Huawei smart screen changes automatically.

If you use Huawei smart screen, the screen brightness will be adjusted automatically. Please refer to the following different scenarios for troubleshooting:

First of all, the brightness of Huawei's smart screen S3 Pro will automatically dim.

Huawei smart screen S3 Pro supports AI intelligent energy-saving function. When turned on, it can detect whether there is anyone in front of the screen through the camera. If there is no one, it will automatically adjust the brightness of the screen to save energy and electricity. If you want to keep the brightness of Huawei's smart screen S3 Pro unchanged, please operate as follows:

1. The camera protective film will affect the camera's judgment on the environment. Please make sure that the camera protective film has been removed before using the AI intelligent energy saving function.

2. You can open Smart Screen Settings > Smart Assistant > AI Eye > Smart Energy Saving, and just turn off the switch behind Smart Energy Saving.

note:

1. Select "Strong" for energy saving effect: after detecting that the user leaves for about 3 minutes, the screen brightness level is 0.

2. Select "weak" energy-saving effect: after detecting that the user leaves for about 15 minutes, the screen brightness drops to 40%.

Second, when the brightness of the surrounding environment changes (such as turning on the lights and opening and closing the curtains), the brightness of the screen will be automatically adjusted.

If the automatic light sensing function is turned on, the smart screen will intelligently detect the current ambient light brightness and automatically adjust the screen brightness to protect your eyesight health and improve your comfort, which is normal. If you want to keep the screen brightness unchanged when using smart screen, please operate as follows:

1. Turn off the automatic light sensing function:

● Huawei Smart Screen S3 Pro: Smart Screen Settings > Smart Assistant > AI Eye > AI Ambient Light Sensing, and select Close.

note:

Camera protective film will affect the camera's judgment on the environment. Before using the AI ambient light sensing function, please make sure that the camera protective film has been removed.

● other models: smart screen settings > image > automatic light sensing, and select off.

2. Return to the image interface, select the screen brightness, and adjust the screen brightness to the required brightness with the remote controller.

note:

Huawei Smart Screen SE Series, Huawei Smart Screen S Series (except Huawei Smart Screen S86 Pro and Huawei Smart Screen S3 Pro), Huawei Vision Smart Screen 75&; 65. Huawei Visual Smart Screen 3. The glory smart screen X 1 series does not support the automatic light sensing function.

Third, the screen brightness is automatically adjusted when it is just turned on/woken up.

When the smart screen is just turned on or awakened, the brightness of the screen will automatically turn on or off. At this time, the brightness change is caused by the darkening of the bright screen, which is a normal phenomenon. Please feel free to use.

Fourth, automatically adjust the screen brightness when switching videos.

When the image mode of the smart screen is automatic, in order to improve your viewing experience, the smart screen will automatically switch between different image modes according to the attributes of the video content (for example, automatically switch between movie mode and sports mode when playing a movie, etc.). ), and the screen brightness will be different in different image modes. If you want the screen brightness to be consistent, please switch the automatic mode to the standard mode in the following four ways before watching:

1. Adjust in the smart screen settings:

Please click Settings in the upper right corner of Smart Screen > Image > Image Mode > Home Page; Standard mode can be switched.

2. Adjust in the global control center:

Please press and hold the menu key of the remote control to enter the control center and select Settings > Image Mode >; Switch between standard modes.

3. Use voice commands to adjust:

You can switch through voice commands, such as "Xiaoyi, switch to standard mode".

4. Adjust in smart life application/smart screen application:

● Smart Life App: After entering Smart Life App, please log in to the same Huawei account as Smart Screen, bind Huawei Smart Screen, click Smart Screen Card, and click View More > Image Settings > Image Mode >; Adjust and switch in standard mode.

● smart screen App: please enter the smart screen App, log in to the same Huawei account as the smart screen, bind Huawei smart screen, and enter the smart screen settings in the smart screen App home page > image > image mode >; Switch between standard modes.

Five, still can't solve it.

If the above survey doesn't help you, please contact us through the official telephone number below, and we will serve you wholeheartedly.