How to connect the remote throttle of truck crane

1 First of all, ensure that the power and ground wires of the line are connected with the corresponding wires on the controller. There are 36 ways to connect three motor wires and three motor wires to the controller. The most traditional method is to test each state one by one.

2. Secondly, the connection can be done continuously, but it must be done carefully and in a certain order. Be careful not to twist too much at a time. If the motor does not rotate smoothly, this state is wrong. If the knob is screwed too much, it will damage the controller. If there is reverse rotation, Hall lines A and C of the controller are interchanged when the phase sequence of the controller is known. Click on the line A and line B to exchange, which can be reversed to forward rotation.

3. Finally, the correct way to verify the connection is that it is normal when running at high current.