Which type of management is practiced for laboratory safety management?

Laboratory safety management is generally practiced at three levels: university, faculty and laboratory. The safe and orderly management of the laboratory is the basic guarantee of normal experimental work. Anyone who enters the laboratory work, study, must comply with the relevant requirements of the laboratory.

The purpose of laboratory safety management is not only to create a clean, neat, scientific experimental atmosphere of civilization, safe experimental teaching environment to motivate students to explore and forge ahead to acquire knowledge, but also a variety of safety regulations on the wall, generally the implementation of the school, the faculty and the laboratory of the three-tier management. According to the laboratory management system requires teachers and students.

The contents of the laboratory safety management system are:

1, all drugs, specimens, solutions should be labeled, and never fill the container with drugs that do not match the label.

2, it is prohibited to use the laboratory vessels for food, and do not use teacups, eating utensils for medicines, and do not use beakers and so on as a tea set to use.

3, concentrated acid, caustic soda has a strong corrosive, do not splash on the skin and clothes, the use of concentrated nitric acid, hydrochloric acid, sulfuric acid, perchloric acid, ammonia, should be in the ventilated kitchen or in the ventilated operation, such as accidentally splashed on the skin or in the eyes, should be immediately flushed with water, and then flushed with five percent of the bicarbonate of bicarbonate solution, the use of acid corrosion of boric acid solution, five percent of the flushing, flushing with water.

4, flammable solvents heating, must be carried out in a water bath or sand bath, avoid the use of open flame. Do not put the hot stove into the experimental cabinet to avoid fire.

5, loaded with strong corrosive, flammable, toxic or explosive substances in the vessel, should be washed by the operator's hands. Empty reagent bottles should be handled in a uniform manner, and should not be thrown to avoid accidents.