What are the advantages of Yin Zhijie's hot push water heater?

Hot Push Introduction: Our water heater is made of black titanium stainless steel plate, and there is a VFD display board on the front to display various working conditions, such as: outlet temperature, drinkable, inedible, inflow, Beijing time, time period and so on. The water tray on the base is punched once by the numerical control machine tool; Adopt American faucet, the whole looks beautiful and exquisite. This water heater can be turned on immediately, the boiling temperature can be adjusted, and the time period can be set (1 on 1 off for one day). It adopts the principle of hot pushing, cold and heat exchange technology and system cold water control technology pioneered by our company, and solves the problem that traditional electric valves are easy to condense hot water. At the same time, due to the use of double water tanks (cold water tank and hot water tank), the water pressure from the cold water tank to the hot water tank is always stable regardless of the tap water pressure, so the water outlet is also stable and the water charge is more accurate. As for the water control machine, we use Shenzhen Kailu, a leading enterprise in the domestic water control industry. The embedded design of IC water controller is not only beautiful, but also protects the water controller from human damage, which is more convenient and humanized. Just like when we are taking a bus and taking a photo with an IC card, the water heater will start to heat the water, and then take another photo and stop working, showing the deducted water fee. It can be divided into two types: water inflow and water inflow with storage. Hot-push water heater with water inlet 12KW, the water output per hour can reach 150- 180L. It takes about 3 minutes to preheat for the first time, 52 seconds to pump a pot of 5 kg thermos water in winter and 46 seconds in summer. The entrance is equipped with a hot push water heater and a hot water tank of 60L, which can be designed to be 3, 6, 9, 12KW according to the actual electricity consumption. The first preheating takes about 30 minutes, such as 12KW, and more than 20 bottles of water (5 kg thermos) can be pumped at a time. It will not boil or produce water, but it will eat when it is pumped out. Hot push water heaters can be divided into IC water heaters and push-button water heaters (without water control). Maintenance is also very convenient. There is a latch door on the right side of the water heater. Open the door (VFD display board operating instructions and computer board wiring coding diagram are posted on the door), and there is a stainless steel box. The wiring on the computer board inside is numbered, so you just have to sit in the right position. The scope of use mainly includes: schools and enterprises.