Frequently asked questions about inflatable castles

1. Sticking requires that glue be evenly applied to the place where the toy is to be pasted and the cloth, and then it is allowed to air for half a minute, and then the cloth sample is pasted to the pasting place, so that the edge will not be tilted after flattening, and the pasting is completed. 2. When the toy is cut, sew it with needle and thread, and then stick a cloth strip or cloth sample. 2. When the incision is less than 5cm, it can be directly pasted with needle and thread. 3. (or detach the seam from the bottom of the air cushion), the opening can be firmly treated by pasting, and the beauty should be considered at the same time. 4. Apply a proper amount of glue to the upturned edge with a small brush, flatten it after a pause, and stick it firmly. 5. The easy-to-wear part of the degumming part is easy to degum after long-term use, and the cloth can be cut into different shapes and attached to the degumming part. 6. After the toy with large air leakage is used for a long time, the air leakage is greatly increased due to the widening of pinhole seams in some parts. You can consider sticking cloth strips at the joints to reduce air leakage. If the toys are too old, we should consider scrapping them to prevent problems in operation. 7. Generally, the local abnormal bulging of the air cushion means that the towel is torn from the air cushion. You can disassemble the bottom of the air cushion along the seam, connect the lace with the air cushion with a needle and thread, and then stick the protective seam with a cloth strip. 8. Maintenance knowledge (1) Before the toy is deflated, clean the toy surface with a semi-dry towel, dry it, fold it and keep it in a cool and clean place; (2) If toys are not properly stored in water, they should be dried in a dry and ventilated place until the water evaporates, and no water can be stored; (3) The blower should be stored in a dry and ventilated place to prevent from being affected with damp; (4) Toys stored for a long time should be regularly checked for moisture, and should be dried and wiped clean in a ventilated place.