How to make the fishing line float on the fishing rod

There are many fishing enthusiasts and friends who like fishing, but as beginners, I don't know how to tie the fishing line hook, how to install the floating lead pendant, and how to connect the fishing line with the fishing rod. Below, I will write some experience on the steps of installing fishing hook, seven-star drift, lead pendant, space bean and connecting fishing rod myself, hoping to help beginners.

Tools/raw materials

corner

hook

Seven-star buoy or vertical buoy

Space bean, lead pendant

Scissors and vises

Methods/steps

Preparation: Prepare some necessary tools such as fishing line, hook, seven-star drift, lead pendant, space bean, scissors, etc. Install the seven-star drift first, because I prefer to use it, because it is sensitive to use and accurate and fast to catch, which is suitable for some occasions such as fishing small crucian carp in the wild. I used a burgundy fishing line of No.65438 +0.0, with a standard diameter of 0. 165mm, a hook with black or gold sleeves of No.6-7, a small size of 0.8 cm, and lead. Look at the following steps:

Step 1: All the seven-star floats we bought are set by set. Pass the fishing line through the wire hole under the seven-star float, and then pull the float to the line. Generally, it is six packs, which are pulled to the line one by one according to the steps. Pay attention to the rough drift in the middle position, it will look better.

Step 2: Install the space bean, fold the line slightly for a short period, also pass through the steel wire hole under the space bean, and then pull the space bean onto the line. Cut the thin steel wire with scissors, throw away the unnecessary parts, tie a knot in the front part, and fix the space bean to prevent it from slipping. This is used to connect the fishing rod, which is very simple and convenient. I didn't know how to use this before, and it was very laborious to install the fishing rod.

Step 3: hook, I won't say much about this. You can follow the pictures or online methods.

Step 4: Install the lead pendant. Because I use a seven-star float with a small size of 0.8 cm, the lead pendant should not be too heavy, otherwise the hook will sink as soon as it enters the water. If the drift is large, it can be adjusted with the corresponding lead pendant. You can try to drift with a specific size. You'd better prepare a nail clipper when fishing. If it is off, you can trim the lead pendant and adjust it flexibly when fishing. Well, after the installation here, the line will be wound on the line board, and a complete method of tying the hook, line, float and lead fishing rod will be completed.

end

Matters needing attention

The fishing line will have a folded part after the seven-star drift is pulled in. Please change a section before continuing. After all the lines are pulled in, cut off the folded part with scissors, so that the fishing line is not easy to break.

After installing the hook, the extra fishing line can be twisted into two strands and fixed with a lead pendant, so that the tied hook is not easy to fall off.