How to Repair and Dismantle the Integrated Range Hood

Integrated stove hood is a common kitchen appliance in our daily life. After a period of use, some problems will inevitably occur, such as abnormal work and loud noise, which need to be repaired and disassembled. The following will introduce the maintenance and disassembly methods of the integrated stove hood.

I. Maintenance

1. Loose or damaged power cord: At this time, the power cord needs to be removed, reconnected or replaced.

2. The fan blade is deformed or falls off: the cover plate can be removed, the fan blade can be taken out, and a new fan blade can be installed or replaced.

3. Motor failure: Remove the motor, check whether the motor is damaged, and reconnect or replace it with a new one.

4. Key failure: At this time, remove the key cover, clean the inside or replace it with a new key.

5. The filter screen is blocked: just remove the filter screen and clean it.

Second, disassembly

1. Dismantle the air duct: remove the hood shell of the integrated stove, remove the air duct bracket, and then remove the air duct.

2. Dismantle the motor: remove the solenoid valve wire, remove the motor fixing screw, and then remove the motor.

3. Dismantle the fan: remove the bell mouth, remove the fixing screw of the fan, and then remove the fan.

4. Dismantle the panel: remove the fixing screws of the panel, and then remove the panel.

5. Remove the keycap: Remove the fixing screw of the keycap, and then remove the keycap.

6. Remove the lamp holder: remove the fixing screw of the lamp holder, and then remove the lamp holder.

In short, the disassembly and maintenance of the integrated stove hood need careful operation, follow the instructions and safety operation specifications, and consult professionals if you don't understand. It's best to check the warranty period of home appliances before maintenance to avoid affecting the warranty by self-maintenance.