The difference between water-in-water and water-in-sand

The difference between water-in-water and water-wrapped sand lies in raw materials, texture, properties, uses and dosage.

1, raw materials

Sand-in-water and water-in-water are different in raw material composition. Sand-in-water originally mainly includes emulsion, natural colored sand and additives, with high emulsion content and rich marble simulation.

Water-in-water raw materials mainly include emulsion and paint color points, which belong to pure latex paint.

2. Texture

In terms of texture, because the raw material of sand in water is natural colored sand, it belongs to pockmarked surface after spraying, which has a three-dimensional effect, a concave-convex feeling by hand and a texture of natural stone.

After water-in-water spraying, the surface is smooth and has no concave-convex feeling. As far as stereoscopic effect is concerned, water in water is not as good as sand in water.

Step 3 perform

In terms of effect, sand-in-water is an upgraded product of water-in-water with better performance. However, due to the high content of water-in-water emulsion and the soft film-forming substance, water-in-water is worse than sand-in-water in terms of impact resistance and crack resistance.

Step 4 use

There is also a difference between sand in water and water in water. Water-in-water is generally used for the wall of imitation rock products, and sand-in-water is mostly used for the interior and exterior walls of high-grade buildings.

5. Dose

In terms of construction technology, there is not much difference between sand in water and water in water. The only difference is that the film formed by water-in-water spraying is relatively thin, and sand-in-water needs to be sprayed with a textured effect, and the spraying amount is nearly twice that of sand-in-water spraying.