Wiring of 6-wire heater Yuba switch

These six rows are brown, white, yellow, black and blue. The red one. Brown is the fire line, and the other five are the outgoing lines, which are the control lines. The brown line and blue line of the power supply can be connected according to the legend. The wiring colors of different brands of Yuba are slightly different. Please refer to Yuba's instructions for wiring.

The wiring diagram of the six-wire heater Yuba switch is as follows:

Extended data:

Precautions:

Yuba should be installed in the center of the bathroom. Many families install it above the bathtub or shower to make it look like the temperature rises rapidly in winter, but there are also safety problems. Because the infrared radiation lamp heats up quickly, it is easy to be burned if it is too close to the human body.

The correct way should be to install the bathtub in the center of the top of the bathroom, or slightly close to the bathtub, so as to maximize its function.

Don't spray water at work. Pay special attention to using Yuba: Although Yuba is waterproof, it has never been used with water. Yuba's waterproof lamp has waterproof performance, but the metal part of the fuselage can't. This is because the metal body is still a conductive power supply. If water is splashed, it will cause short circuit danger and other power sources.