Traditional mud

Now there is a new type of ceramic tile adhesive, which is made by scientific proportioning and adding various additives. It also contains cement. Although the price of tile adhesive is a bit expensive, it has also seized some markets. It is even predicted that the use of tile adhesive is the general trend ... Choose P.042.5 ordinary portland cement, as long as it is high-grade cement, and paste tiles with high-grade cement, which has good early strength and rapid solidification and shrinkage. With P.C32.5 special cement for home decoration, this will not happen. Cement mortar, made of cement, fine aggregate and water, and lime, active admixture or additive added as needed, is divided into cement mortar and cement mixed mortar, which is the main way of traditional tile paving and is accepted and used by most people.

Tile glue, due to the continuous development of economy, there are many brands of tile glue and cement. How to make a correct choice between tile glue and cement requires us to understand the difference between tile glue and cement. Using morning tile adhesive can save more space on the construction site than using cement, and workers can complete the proportion of adhesive in the barrel in proportion, which is clean and efficient and reduces the dust on the construction site. However, some engineering experts pointed out that the thin paste method has higher requirements for the basement, and it is necessary to level the wall first, which is more than cement mortar paving.

When laying tiles, we used to use traditional cement mortar, cement powder+sand mixed with water to make slurry, and then dry and wet paving to lay tiles. The back of the wall and brick add up to almost two centimeters, which is not much different from river sand cement and dries slowly. You have to wait a while to get the clip, and the firmness is slightly better, so as long as it is not vitrified brick, it is not recommended to use tile glue. It is expensive and difficult to construct. Qualitative slow tile adhesive is a mixture of emulsion, cement and cement additives, mainly to prevent tiles from bulging and falling off! ! Brush on the back of ceramic tile during construction, and paste it with cement yellow sand after drying!