Why do you need to measure beams when measuring houses in decoration design? How to measure and mark?

Why do you need to measure beams when measuring houses in decoration design? How to measure and mark? Ceiling design; Decorating the ceiling is a common ceiling design in family decoration, and the roof beam is a very big "obstacle" on the ceiling, which is particularly harmful to the ceiling decoration. For example, the height of the beam depends on the relative height of the decorated ceiling, and some houses with small building height need to consider the harm of the decorated ceiling to the floors, which is a series of key factors. Especially when the roof beam occurs in the middle of the space, the design scheme of ceiling design is a headache. If the dimensions are not recorded, the following design scheme will cause inconvenience.

In order to make better use of the apartment area, the scheme design is likely to update the room type, and the partition wall will be demolished or built according to the construction situation; As the roof beam is the load-bearing structure of the engineering building, the roof beam structure should be considered when the wall is demolished to prevent the room type transformation from endangering the safety factor of the load-bearing structure of the building.

Household central air conditioning; If a central air conditioner is to be installed, the pipeline of the indoor unit of the air conditioner must go through the ceiling. As a load-bearing structure, the load-bearing beam in the ceiling will also interfere with the installation position of the pipeline of the central air conditioner and the indoor unit of the air conditioner. In addition, the roof beam also has some interference, such as the pipeline of domestic fresh air system and the suspended ceiling of hydropower project.

Overall planning of furniture layout; Roof beams have more room types. When completing the overall planning of indoor space layout, the harm of beams to the whole should also be considered. For example, in the bedroom, there are two walls that can rely on the wardrobe. One wall has a raised roof beam at the top and the other wall does not. In that case, after the wall with roof beams is put on the wardrobe, it can also be blocked to make the indoor space more square. Generally speaking, in the case of accurate house measurement, roof beams must be marked and tested; But the top beam is held high, how to pull up the basic meter scale? I took a simple little video in the company, for your reference.