Does the water heater need to be cleaned regularly? How is the sewage in the water heater formed?

Usually busy with work, many people only have time to go back to their hometown on weekends or national holidays. However, many friends will find that the storage water heater at home stinks when it is turned on because it has not been used for a long time. Even after waiting for a long time, I still feel very unclean. Through the method he found on the Internet, Bian Xiao tried to open the sewage outlets for drainage, only to find that they were old and dirty.

It turns out that the water in the storage water heater will not be completely used up every time it takes a bath, so the remaining water is easy to deposit dirt at the bottom. In addition, because the water inlet pipe is generally set at a lower position, and the water outlet is higher, the water is discharged from a higher place, so it is not easy to touch the stains at the bottom, which is why the odor still exists in the storage water heater that has not been used for a long time, even if we try our best to drain water. For health, we still can't be lazy. When we find that our storage water heater has an odor or the water quality is not clean, we should take some time to clean it.

Maybe some friends will say that this bath water is not for drinking, and it is needless to say that it is too clean and sterile. After all, big bacteria eat small bacteria, so even without cleaning. Obviously, such a concept and statement is very wrong.

In this civilized era, people's living standards are getting higher and higher, and the requirements for quality of life are also improving. If you still bathe with sewage at this time, it will inevitably give people physical and psychological discomfort. Imagine taking a bath with smelly dirty water. Even if the water looks clear, we will inevitably feel a little uncomfortable because of the peculiar smell.

In terms of health, it is not surprising that dirty water directly contacts our skin, which may affect the state of our skin and even lead to skin diseases. It is well known that our eyes are very sensitive and fragile. If we wash our face with dirty water, it will easily lead to eye inflammation and so on. Therefore, don't think that bath water is not for drinking, and we will lower the quality requirements for water. We have to clean the storage water heater that has not been used for a long time before we can continue to use it. Even if you use it all the time, you should clean it regularly.

So what are the good methods and tricks to clean the storage water heater?

There are many ways to clean the storage water heater. There are two common methods, one is to open the sewage outlet for simple cleaning, and the other is to thoroughly clean (liner, heating rod, etc. ).

Bian Xiao found that there are many ways to clean and discharge pollutants from water storage electric water heaters through online search and inquiry. Internet gods have their own skills and generously shared their own skills. Among them, there are methods of forcing water and ironing pipes, which are unheard of and deeply wonderful; There are also professional masters who need all kinds of equipment.

After a round of careful comparison and screening, Bian Xiao finally chose a more reliable "cleaning method for opening sewage outlets" to share with you. Friends in need, please continue to look down:

First of all, the water storage electric water heater must be unplugged before cleaning and draining to ensure safety. Of course, if we want to operate more safely, we can also turn off the main power supply in the house.

After turning off the power supply, we will tighten the water inlet and outlet switch. Then, unscrew the pipe plug of the sewage outlet with a trap or other wrench. The sewage outlet is easy to find. Now most products are described as shown in the following figure, generally located on the left or right side of the water inlet and outlet. Then you just need to easily turn on the water inlet switch of cold water, so that the dirt and sediment in the water inside the storage water heater will be continuously discharged with the water flow until you can see that the discharged water is clean and tasteless.

After removing the scale, we put it back carefully. Similarly, to keep the power off, first screw back the plug of the sewage outlet, and then close the cold water inlet.

In addition, if you find that your own water storage electric water heater is really dirty, even if you have cleaned it by opening the sewage outlet, you still think there are many dirty things in it. Then we can also choose another advanced version of cleaning, that is, a thorough cleaning of the inner container and heating rod of the storage electric water heater. As for the specific method and operation of the advanced version cleaning, Bian Xiao won't teach fish to swim, because Bian Xiao suggested that if it is really necessary to thoroughly clean, we might as well go directly to professional domestic workers for help, so as to avoid our own operational mistakes and damage to the storage electric water heater, which is not worth the candle.

Summary: Under normal circumstances, it is really not good to clean the dirt inside the water storage electric water heater by opening the sewage outlet regularly for simple cleaning. You can also ask professionals for help. But in any case, as a common and commonly used household appliance in daily life, the water discharged from the water heater is in direct contact with our bodies, and the water quality is very important, so we should remember to clean the dirt regularly and keep the container clean.