What do you know about brick carving?

Different three-dimensional sense, and some lines that have been struck must be redrawn. Then lay out the blank until the outline of the entire pattern is finalized. The traditional tool for making blanks is to use a small hammer and a steel knife with high hardness to slowly punch it out. Generally, it is operated with electric tools (cutting machine, electric grinding head). After the blank is completed, fine carving is required. This tool requires careful workers to operate. It is necessary to depict people's facial expressions, the texture of tree trunks, the meridians of leaves, the tiles of houses, etc. very delicately until you are satisfied. This process must be done with a very sharp self-made steel knife. After all is completed, polish and repair. Brick carving is generally divided into two categories: front-kiln carving and back-kiln carving. Carving in front of the kiln is to carve the adobe and bake it into bricks, while carving in the back-kiln is to carve on the finished bricks. Brick carvings in Tongxiang City are generally post-kiln carvings. Carving behind the kiln is difficult, with heavy marks from knives and chisels, and the carving method is more difficult to master than jade carving and stone carving. In particular, green brick carving is more difficult, so the bricks must be soaked in water to turn the green brick into a mature brick before starting.

?