Self-built houses want to install heating facilities. How to choose heating and floor heating?

Self-built houses in rural areas can be heated by floor tiles, which will be healthier than burning coal and avoid gas poisoning. Floor tiles can be more hygienic and safer for heating, and then the temperature in the house is still high and it is very comfortable to live in it. Thank you. Third, the biomass pellet furnace, I think, is very good. It is a fool-like operation. It only needs to pour the pellets into the silo, light it by itself, and then exhaust it. The set temperature can be adjusted up to 45 degrees. Buy a bigger one if the area is large, and a smaller one if the area is small. You can also control the switch of the stove through the mobile phone, and adjust the gear and temperature, which is very convenient! The total cost of a day is not high!

Fortunately, the self-built houses in Northeast China have considered the requirements of thermal insulation at the early stage of construction, so the walls are thickened, insulated with thermal insulation materials, and plastic steel doors and windows are installed. Of course, it is essential to install a boiler for heating. In recent years, in many places, when winter comes, curved steel pipe supports are used in front of houses and covered with transparent plastic films, which effectively improves the thermal insulation performance and does not affect the lighting. Building a house is like building blocks, replacing the traditional building modes such as clay brick walls and red brick houses, and realizing the standardized, factory-built, assembled and refined construction of earthquake-resistant, disaster-resistant and energy-saving houses in villages and towns in China. EPS thermal insulation and structural integration technology is one of the important supports for the country to promote the modernization of housing industry and reach the national green building standards, and it is an industry vigorously promoted by the country.

Use the balcony to decorate the sun room, install the sun room, use as many glass windows as possible, and let the sunlight fully shine into the sun room, so that the room will be warmer. Secondly, in terms of architectural layout design, it is shorter to design the bedroom and living room to the sunrise side and the kitchen and bathroom to the non-sunrise side than to leave the kitchen and bathroom. In this way, the heating kang can provide indoor heating, and the other can directly lead to the outside. When the heating kang does not need heat, the flue gas is directly discharged to the outside, and the room is heated as usual. This method is very convenient and practical, especially for families with old people and children.