How to remove the partition of traditional wardrobe

1. Prepare removal tool: Phillips screwdriver.

2. Take out the tightened screws from inside to outside and from top to bottom.

3, until the gap is facing the riser, you can take off the partition.

For the design of partition, take out the partition with a nail and put it in a suitable position. Saw off the middle of the partition directly. After removing a screw from the bottom, saw off the partition or smash it. At this point, the three-in-one wardrobe was demolished.

Extended data:

The advantages of the three-in-one connector are as follows:

1, three-in-one connection, which can be disassembled and assembled many times. This is also one of the advantages of panel furniture.

2. hidden. The three-in-one connector is not visible from the outer surface.

3. Three-in-one connection reduces the use of adhesive. More environmentally friendly.

4. Embedded nuts: special for steel bars; Connecting rod: special for connection; Eccentricity: solved the locking problem between plates. It is firmly connected by expansion bolt, bolt and eccentric wheel.