How to trim eyebrows to look natural?

The method of eyebrow shaping is as follows:

Step 1: First, we need to trim the small hair under the eyebrows with a eyebrow trimmer. When trimming, you should lift your eyebrows up by hand, which is easier to trim. You can also pull it out with tweezers, but it may be slower. But tweezers may take longer to repair than eyebrow knife. In this way, all the hairs are scraped clean according to the eyebrow shape.

Step 2: Then fix the shape of the eyebrows. First, scrape off the foreign bodies on them. When scraping, the eyebrow knife makes an angle of about 45 degrees with the skin, so the scraping is better and will be roughly repaired according to the fixed position.

Step 3: Everyone's eyebrows are different in length, and some parts must be longer. At this time, it is necessary to cut off the long part with scissors. You can gently comb the tail of your eyebrows down with an eyebrow brush. When you comb them down, you will find several particularly long parts. Cut gently with scissors, not too much.

Step 4: After combing your eyebrows with an eyebrow brush, comb your eyebrows upward, and when you press them upward, you will see that some of them have grown out. We will cut off the long part with scissors, so that we can get a neat and beautiful eyebrow shape.

Watch your eyebrows:

When trimming the above hair, pay attention to keep a certain distance from the eyebrows. Press down bit by bit. Don't shave too much, you'll lose the corner. Don't accumulate too much shaved hair. When pruning, be sure to knock them off with a brush. Check and trim slowly along the eyebrows.