How to set out Nikon total station in a straight line?

1. New project: press the power button to open the GPS manual, click the icon to start the Hi-RTK road program, enter the main interface of the program, and click the survey icon to open the step survey interface; Create a new project and set parameters (you can also apply parameters from other local projects). This example applies parameters from other projects to create a new project -20 1309 16.

2. Preparation data: The original data of linear lofting can be control points, recorded points measured on site or design points on drawings. If there are multiple lofting lines, you can edit the coordinate data of the line endpoints into a text file first, and then import the data file (. Txt) is transmitted from the computer to the receiver's notebook through the data cable-in this case, the straight line lofting is copied. Txt to GPS handheld NAND flash/project/road/20130916/points. If the endpoint of the lofting straight line is the control point or recording point in the notebook, this step can be omitted.

3. Import data: press the power button to open the GPS notebook, click the icon to start the Hi-RTK road program, enter the main interface of the program, and click the measurement icon to open the step survey interface. Click on the step size measurement in the upper left corner and a drop-down menu will appear. Click on Select 5. The lofting point library will enter the lofting point interface to view the existing lofting points, click the Import Data icon in the lower right corner to enter the custom format import interface to set the data import format, and then click Save Settings in the upper right corner to enter the import data file selection, and find and select the previously copied lofting line. Txt text file, the file will be read successfully! Prompt box, click OK to complete data import. You can check the lofting point to ensure that the data is imported correctly, and then click X to exit the lofting point interface and return to the step measurement interface. If the endpoint of the lofting straight line is the control point or recording point in the notebook, this step can be omitted.

4.GPS connection: press the power button to open the GPS receiver and the phone book respectively. After the GPS is successfully connected to the CORS network, connect the phone book and the receiver with Bluetooth. The specific operation of the notebook is: click the icon to start the Hi-RTK Road program, enter the main interface of the program, and then click the GPS icon to set the parameters.