How to fold the video of Rose?

2. How to fold the roses?

How to fold flowers? How to fold flowers with paper? Processing pictures

Required materials: square paper and glue. Specific steps: 1 Fold the square paper in half to form a triangle.

Fold the two bottom corners of the triangle at the vertex. 3 Fold both sides outward (fold the side marked with red to the side marked with blue) 4 Turn the inside of the triangle on both sides into a pocket shape 5 Fold the triangle protruding from both sides downward 6 Fold the isosceles triangle on both sides inward with the height (red line) as a crease 7 Apply glue to one side of the triangle, and fold out 5 or 6 petals in the same way as the other side, and stick them together one by one. Done ~ You can make 5 petals or 6 petals according to your personal preference ~ 9 You can fold many such flowers together to make a flower ball ~ Reference address: zhidiyi/zhezhihua/Jingyan.baidu/article/90895e0fbb871764eC6b0be2, jingyan.baidu/article/425e69e6d5eab5be14fc.

Video of folding method of mouth cloth disc

It is not easy to explain rags in words. It is best to show the steps on the spot or in pictures. When we train waiters in the hotel, we demonstrate on the spot. Generally, you need to master 13 species/person.

If you want to learn, I suggest you buy the example of 12 cloth folding by Golden Shield Publishing House, which is illustrated with pictures and texts and has a better effect. Common ones are crane orchid, plantain, goldfish, chrysanthemum and so on. It's all up there. You might as well have a look. Simple words should be clear at a glance, such as how much to fold, how to unfold, and what crease station to see, in order to be vivid.

Oral cloth flowers can be divided into two categories: disc flowers and cup flowers. According to the folded graphics, there are flowers, birds, fish and so on.

Every piece of cloth is required to be washed and ironed, preferably starched, so that the folded cloth will be clean and straight. Pay attention to hygiene when folding the cloth flower.

When folding, wash your hands first, design the shape of the folded cloth in advance, try to form it once, avoid repeated folding, pinch it evenly, and strive to be novel and realistic. Mouth cloth flowers should be placed neatly and strewn at random, and the heads of animal images should generally face directly below the diners.

There are two ways to fold cloth. Four-leaf lotus: 1 Fold the mouth cloth into a rectangle.

2. Fold it in half again to make a square. 3. Align the two top edges to the middle.

4. Fold the bottom corner and insert it with both sides facing the back. 5. Open four towels and make them into lotus shapes.

6. Put it on a plate and arrange it. Begonia macrophylla: 1. Fold the bottom corner up.

2. Roll up from the bottom edge, not too tight. 3. Fold the rolled square towel in half and put it into the cup. Turn down the corners of the two towels and arrange and finalize the design.

Mouth cloth folding video

The folding method of napkin flowers is 1. Fold the napkin diagonally into an equilateral triangle.

Fold the two bottom corners of the triangle to the top corners to form a square. 2. Fold the lower corner up to a place not far from the upper corner.

3. Fold the newly folded corner down to the center of the bottom edge. Fix the folded top corner in the center of the bottom edge with your left hand, and then prepare to turn it over.

Hold the triangle with one hand, and fold the bottom corner of one side to the middle with the other hand, which is about one third of the length of the bottom edge. Do the same for the other corner.

Two folded corners can be inserted together. 4. Insert the four fingers of the right hand into the bottom and support it into a cylinder.

Then the small corners exposed on both sides turn down. That's it! Reference: bbs.craftworkshop/Archive_view? board id = 33 & amp； ID=5244 See more folding methods: Simple course of napkin flower: wedding details/Planning/ napkin.cfm.

Illustrate how to DIY simple origami flower method.

There are too many pictures to upload. The steps I wrote for you. Take a good look and you will succeed! 1. First, we need to prepare some basic materials and tools.

What we see here are tweezers, scissors, crepe paper and wire. If you want a fuller rose structure, you can add a sugar.

2. First, deal with crumpled paper. As shown in the figure, the ultra-strip corrugated paper is folded in half from left to right, and the new city is similar to the convex structure of eggshells.

3. Then string the wire into the candy, then wrap it with crepe paper, and then wrap the bottom with crepe paper. 4. Then cut out the crepe petals as shown in the figure.

5. Then stick the petals of crepe paper around the flower structure. 6. This forms a very beautiful flower structure.

7. Then continue to paste the petals upwards, and the petals in the inner layer can adopt the peripheral paste structure as shown in the figure. 8. The bottom uses a relatively large petal structure to form a wrapped petal structure.

9. Finally, cut out the long paper and make it into a petal structure. 10. Stick it on the crumpled paper rising from the bottom.

1 1. Finally, the delicate rose petal effect of crepe paper can be formed simply by painting the petal edge with pigment. 12. The actual wrinkle paper rose origami process is explained to complete the effect.

How to fold origami flowers?

Origami flower practice:

Step one:

You need three colors of paper. Step 2: Fold the petals.

Use eight rectangular pieces of paper tape and fold it like this:

Step 3: Fold the leaves.

The folding method is the same as the petals above. Step 4: Make stamens. Step five:

Now that the petals, leaves and stamens are ready, here's what you need to do:

2 pink petals+1 green leaves+1 yellow stamens, stacked together as follows. Step 6: Tie them together.

Put the four groups made in the last step together and tie them in the middle with a belt. Step 7: Expand

After the top was fastened, it unfolded like this. Be careful to take it piece by piece when unfolding.

Step 8: Stand up the stamens.

First, turn it over.

How to origami roses?

Practice of origami roses

Prepare a piece of colored paper with the back facing up. First, make creases as shown in the figure. The darker lines are valley marks and the brighter lines are mountain marks. 、

Fold along the crease as shown in the figure.

Fold off four raised edges counterclockwise, and you get this picture.

Turn the origami over and you can see the square as shown in the picture.

As shown in the figure, fold the point on the edge counterclockwise to another point to get the initial shape of the 3D rose.

Turn the origami upside down and fold the protruding edges clockwise as shown.

Turn the origami over again, fold the edges inward in turn, and fix it to make the flower base.

Turn to the front again. At this time, the basic has been finished. Just adjust the interior with your fingers.

By making some small adjustments to the edges, the production of origami roses is completed.

It is recommended that the paper be larger, or you will encounter some trouble when you do it in the future.

For more practices of paper roses, please refer to the following tutorial ESG web/article/class138/class171/Ziyi/200902/72680 _ 3.

What is the method of folding flowers in origami encyclopedia?

Fold the origami in half and press the center square down at the same time. The origami is like this. The top and bottom paper must be folded in the opposite direction, and then turned out at the bottom of the origami to see the above picture.

Note that it looks like a windmill after folding. Just press the red line and turn out the origami of the profile photo. I hope you can better understand. Fold the origami in half and then turn it back as shown by the red line.

After all the four petals are folded, gently pull out the four petals to expose the flower core, and gently press the edge of the petals to make the outer ends of the petals produce a certain curvature, as if they were real petals. In order to make the flowers look more beautiful, you can try different papers, because too thick or too thin paper will affect the folded flowers. The last step of flowers is to make the petals look more natural and beautiful. Of course, if you add branches and leaves, it will be more beautiful in a vase! Here is how to add branches and leaves to flowers. Making leaves is very simple. Just cut a piece of green paper in the shape of a leaf and fold out the veins. These are the materials to be prepared.

You can buy wire for flowers directly at the stationery store. If you already have wire at home, you can also buy green sticky paper (also a necessary product for making flowers) at the stationery store and wrap the wire. The effect is the same! Put a circle at the top of the wire to help fix the wire in the flower. Insert the iron wire into the bottom of the flower and stick some double-sided tape on the bottom of the flower. Wrap green tape around the wire and stick the flowers and branches together. Although the green adhesive tape is sticky, if it is not sticky enough, you can also use double-sided tape to help. So I want to stick some double-sided tape on the bottom of the flower.

How to fold roses with paper

Tools/raw materials: a square piece of paper Method/Steps: 1. Fold the square piece of paper in half, then fold both sides in the middle, and fold it again for the third time.

As shown in the figure. 2. After opening.

As shown in the figure, one corner is folded in half, and so are other triangles. 3. Fold in half, and then fold in half along the middle to form a diamond.

After opening, the solid line drawn along the way will be folded down, and so will the other side. Pay attention to the crease. 5. Then restore the diamond shape, fold it along the solid line of the picture, press out the crease and open it.

6, according to the diagonal, as shown in figure. 7. After flattening, press both sides.

8. Open and expand. 9. Make the shape as shown in the figure according to the crease.

10, quadrilateral is consistent. 1 1. Turn it over and aim at both sides marked with "m".

12. Fold the small square diagonally as shown in the figure, crease it, press it inward, and finally fold it to one side. 13. Fold the place where the solid line is drawn on the way, press out the crease, a large piece on the left will overwhelm the right, and the prominent part will be folded into a triangle.

14, the other three faces do the same thing, as shown in the figure. Turn it over as shown.

15, press four corners at a time, and the last one will fit into the first one. 16, turn it over.

17, arrange the petals, and the beautiful rose will be ready. .

How to fold roses? Simple folding method

The simple folding method of folding roses can be roughly divided into 18 steps, as follows: 1. First, prepare four small square pieces of paper (7.5cmX7.5cm) and one rectangular piece of paper (7.5cmX 15cm).

2. First, fold the branches of the rose in half, take out the rectangular paper, and roll one corner inward into a cylindrical shape. 3. Roll the rolled cylinder up to this position (don't leave a gap in the middle when rolling, but roll it tightly) and apply glue on this corner.

4. Roll the corner into the cylinder with glue and stick it firmly. In this way, the flower branches are broken.

Take out a square piece of paper and fold it in half on both sides. 6. Fold the left and right sides together and align them.

7. Fold the lower right corner to the upper left corner diagonally and align. 8. Hold the upper right corner (don't fork) and cut it with scissors from this position.

9. Cut the upper part into an arc, and then cut off a small part of the top corner below, which is the pattern obtained after unfolding. Operate the other three in the same way, and you will get four such patterns in total. 10, reducing four flower patterns, 1, 2, 3 and 4 petals, as shown in the figure.

1 1. Discard 2 petals and 4 petals cut on the right. 12, and the readjusted low bits are 1, 3, 4, 5, 6 and 7 petals respectively.

13. Apply glue to two separate petals and stick them together. 14, this is the new shape after all the glue.

15, and then roll all the petals outward, as shown in the figure. 16. Apply glue to the petals of 1 and stick them on the top of the flower branches to adjust the shape.

17. Apply glue to the lower part of the flower branch 1 petal, and pass two petals through the central hole from the other end of the flower branch. Stick it on.

18. Put the 3rd, 4th, 5th and 6th petals on the top of the flower branch respectively, stick them well and adjust them slightly. In this way, the beautiful rose was folded.

.

Rose folding method

Origami roses need to be prepared for many creases, and the paper needs to be folded over and over again. The following is a detailed diagram.

Take a square piece of paper, fold it horizontally, fold it again on each side, fold it again for 65,438+0 times, leave 7 horizontal creases on the paper, fold it again on each side, fold it again for 65,438+0 times, leave 7 vertical creases on the paper, and fold it diagonally to find the nearest one above the diagonal. Fold the other diagonal upward as in the previous step. Fold a crease to open it, as shown in the above picture, and then fold it diagonally (red line in the picture). Fold the paper according to the position of this red line (diagonal of the small square at the bottom), then unfold the paper and hold the four diagonal lines. The picture above shows the effect of folding the folded paper in half. Fold the square at the top diagonally downward and fold the origami into this shape. The upper and lower paper must be folded in the opposite direction, and origami becomes this picture. Flatten the origami, fold the upper left origami downward according to the red line, and then unfold the second half from the back to form the upper appearance. Then turn out the bottom half of the origami to look at the picture. Note that it looks like a windmill after folding. According to the instructions of the red line, fold down, press the red line, fold the paper down, and take a side photo. I hope you can better understand what the four sides will look like after they are all completed.

Patiently learn this step! It is not easy to fold the origami backwards as shown by the red line. Fold the small triangle to the upper right as shown by the red line, and then fold it to the left as shown by the red line. This is a recent photo of one of the four legs folded. Fold the origami backwards as shown by the red line, and then fold all four sheets. The four folded side views are from the top of the flower. This is the bottom of the flower. Then fold one of the legs inward, and the second leg, the third leg and the fourth leg gently fold four flaps outward. Pull, expose the flower core, and gently press the edge of the petal to make the outer end of the petal produce a certain arc, as if it were a real petal. In order to make the flowers look more beautiful, you can try different papers, because too thick or too thin paper will affect the folded appearance of the flowers. The last step of flowering is to decorate the petals properly to make them look more natural and beautiful.

Of course, if you add branches and leaves, it will be more beautiful in a vase! Here's how to add branches and leaves to flowers! These are the materials to be prepared. You can buy wire for flowers directly at the stationery store. If you have wire at home, you can also buy green tape (also a necessary product for making flowers) at the stationery store and wrap the wire. The effect is the same! Put a circle on the wire to help fix the wire in the flower: the production of leaves is very simple, just cut a piece of green paper in the shape of leaves and fold out the veins. Insert the wire into the bottom of the flower and stick some double-sided tape on the bottom of the flower.

Wrap green sticky paper around the wire and stick the flowers and branches together. Although the green tape is sticky, if you feel that it is not sticky enough, you can also use double-sided tape to help.

So I put some double-sided tape on the bottom of the flower last step. After the flowers are fixed, you can add leaves.

What it looks like when flowers, branches and leaves stick together.

. This is a ...

There's another one.

.. Fold the origami inward, and press down the middle square at the same time. Origami is like this. The top and bottom paper must be folded in the opposite direction, and then turned out at the bottom of the origami to see the above picture. Note that it looks like a windmill after folding. Just press the red line to turn the origami down and take a profile photo. I hope you can better understand.

Fold the origami in half and then turn it back as shown by the red line. After all the four petals are folded, gently pull out the four petals to expose the flower core, and gently press the edge of the petals to make the outer ends of the petals produce a certain curvature, as if they were real petals. In order to make the flowers look more beautiful, you can try different papers, because too thick or too thin paper will affect the folded flowers. The last step of flowers is to make the petals look more natural and beautiful.

Of course, if you add branches and leaves, it will be more beautiful in a vase! Here is how to add branches and leaves to flowers. Making leaves is very simple. Just cut a piece of green paper in the shape of a leaf and fold out the veins. These are the materials to be prepared. You can buy wire for flowers directly at the stationery store. If you already have wire at home, you can also buy green sticky paper (also a necessary product for making flowers) at the stationery store and wrap the wire. The effect is the same! Put a circle at the top of the wire to help fix the wire in the flower.

Insert the iron wire into the bottom of the flower and stick some double-sided tape on the bottom of the flower. Wrap green tape around the wire and stick the flowers and branches together. Although the green adhesive tape is sticky, if it is not sticky enough, you can also use double-sided tape to help. So I want to stick some double-sided tape on the bottom of the flower.

How to fold roses

I want to fold roses, and I have summed up some experience myself, hoping it will be useful to my parents.

1. The origami of each step should be aligned and the lines should be fully compact. Although everyone thinks that it is unnecessary to make origami very fine, the pressing line of Kawasaki rose determines whether the rose can be inserted smoothly in the last step. ) 1. The origami material should be slightly Microsoft first. It is recommended to rub the paper and wrapping paper by hand.

In addition, as a beginner, the size of origami should be as large as possible and easy to use. 3. It's best to look at the picture first, then watch the video to understand the vague places in the picture, and finally fold it according to the picture.

According to my previous origami experience, generally speaking, origami is based on video, which makes people impatient and can't settle down to origami well, so I personally think that video is only for the part in the picture that is not very detailed and is not suitable for direct learning. ) 2. When you first start origami, you should have a general understanding of this kind of rose, which is not formed at one time. After all, it is the first time to fold, and it is quite difficult for those who have the best origami skills. After repeated folding by yourself. In addition, everyone's left and right brains have different degrees of development, and there is not much difference in intelligence between those who are good at hands-on operation and those who are not good at hands-on operation. I hope parents can have confidence in themselves and wish them success! .

How to fold roses? Simple folding method

The folding method of roses is to fold the origami in half, and at the same time, press the center square down to fold the origami like this. The top and bottom paper must be folded in the opposite direction and then turned out under the origami.

Note that it looks like a windmill after folding. Press the red line to turn the origami down. Press the red line to fold the origami in half and then fold it back. After all the four petals are folded, gently pull out the four petals to expose the flower core, and gently press the edge of the petals to make the outer ends of the petals produce a certain curvature, as if they were real petals. In order to make the flowers look more beautiful, you can try different papers, because too thick or too thin paper will affect the folded flowers. The last step of flowers is to make the petals look more natural and beautiful.

Of course, if you add branches and leaves, it will be more beautiful in a vase! There is a picture below. You can follow the steps in the picture to complete the rose. Try it quickly.