How do you choose a tattoo machine?

This machine has to be light and fast, the main use is to cut fine lines.

A frame, it is best to be lighter material, easy to cut fine lines when moving quickly

B front shrapnel, I think it is suitable for a slightly harder material, or do a little wider, which will help to weaken the front shrapnel fluttering, out of the needle stroke will not be too long, the contact with the front shrapnel distance between the front shrapnel should not be too close to keep a certain distance to increase the machine in the operation of the popping of the false, the operation is not easy to color fading, the needle upward, the contact with the front shrapnel should not be too close to keep a certain distance can increase the machine in the operation of the popping of the false. Operation is not easy to halo color, the angle of the upward movement of the shrapnel does not need to be very large.

C after the shrapnel, can be appropriate to shorten the length of the rear shrapnel, in order to ensure faster rebound speed, to improve the overall frequency of beat.

D Suspension iron, suitable for a skeletonized light and fast, so that the suspension iron reset will be faster, in order to move to the next cycle faster, the beat inertia will not be very large, and do not stab too deep.

E coil, the coil can choose 24 high coil, the first 10 turns after 8 turns, you can ensure that the efficiency of breaking the skin is enough, and the back force is not too large.

F capacitors, choose low-capacity capacitors.

The overall principle of tuning is to be light and fast, the frequency can be controlled between 100 and 120, because the back force is not particularly strong, the virtual position is also relatively large, with the time you can relatively stab more (because the virtual position of the existence of the actual stabbing will not be so deep), so that the needle is more stable, the fine line looks more fluent for the round 7 or less needles.

The second one, the Long Sword

This machine should actually be more widely applicable, the main work includes cutting thick thread and making black and gray.

A frame, moderate is good, too light frame in the use of easy to shake too much, too heavy cutting line is not easy to maintain the smooth movement.

B before the shrapnel, the material should be softer, shrapnel length moderate, and the gap between the contacts is recommended in about two millimeters, so that both can ensure enough piercing ability, but not too much strength in the back of the cut thick line when the halo color.

C after the shrapnel, regular after the shrapnel can be, too wide and too hard will lead to increased frequency, too narrow and too soft will affect the stability of the machine operation.

D Suspension iron, the use of ordinary suspension iron without hollowing is good, the length can choose a little longer.

E coil, coil before and after 12 turns can be, the height can be selected according to their own habits, I recommend 26 or 28 high.

F capacitors, you can still use capacitors with low capacity.

The tuning style of this machine is the oil of gold, speed, strength, strength to have, but not extreme, the machine frequency is generally set between 75 and 85, can be used to take more than nine round needle cutting line, can also drive rows of nine rows of needles to do the black and gray, suitable for cutting a thick line with the sketching, or color under the bottom of the black and gray.

The third, heavy hammer

This is the most violent machine, only suitable for heavy color or do the new traditional plate fog, the whole highlights the characteristics of a strong.

A rack, to be enough weight, or easy to have excess vibration.

B front shrapnel, choose a softer material, the shrapnel try to do a long and thin, and the contact of the virtual position as small as possible, in order to ensure enough top power output.

C rear shrapnel, regular rear shrapnel can be, too wide and too hard will lead to increased frequency, too narrow and too soft will affect the stability of the machine operation.

D Suspension iron, suspension iron can choose to widen, or simply do two layers of suspension iron, in order to improve the weight of the beat.

E coil, choose the biggest and thickest coil you can buy.

F Capacitor, high capacity to ensure that the output is strong enough and the output frequency is low enough.

This machine, like its nickname, is a dead ringer, specializing in heavy color, traditional board fog or some new traditions will be used in the shallow fog of the large row of needles, the frequency is set to about 50 up and down, so as to ensure that enough stabbing strength, but not too fast to cause skin damage.

The above is my personal experience summed up the direction of the three machine tuning, most of the machines we buy on the market belong to the "semi-finished", we can buy the machine itself according to the characteristics of the machine itself, with reference to the three directions of reasonable tuning and modification, optimization, help debugging out of the machine more suitable for their own.