Introduce two methods of knitting Chinese knots.

Chinese knot is a traditional decorative item in China, which symbolizes auspiciousness, peace and wealth, and has people's beautiful vision since ancient times. There are many colors of Chinese knots, most of which are bright and festive colors such as red, yellow and pink. There are many Chinese knots in the market. Small ones can be hung in front of the car as accessories, and large ones are suitable for hanging on the wall at home. Due to different specifications, the methods of making Chinese knots are also quite different. Next, I will introduce two ways to make Chinese knots.

? Method 1:

Materials: Chinese knot thread (2mm thick), tassel thread, blue and white porcelain beads (sold in porcelain shop), scissors, lighter, ruler, pin, plastic foam board.

1, cut a 450CM long Chinese knot and fold it in half;

2. Make a new knot near the fold (everyone knows the new knot);

3, twitch the rope, move the cow knot to the end where the rope head is folded in half;

4. After a certain distance, do double connection;

5. We put the prepared blue and white porcelain beads between two knots and try the distance and size between the two knots;

6. The two ropes drawn from the double joint begin to weave the ears of wheat;

7. We should weave 30 cm long knots of wheat ears;

8. We need to put a double at the end of the wheat ear knot;

9. We use pins to fix the remaining rope on the plastic foam board to form a cross;

10, we fold the upper half down clockwise, then fold the right half to the left, then fold the original lower half up, then fold the original left half to the right, and press one clockwise;

1 1. After tightening, please follow me and do it counterclockwise again.

12. Now, pull out the bolt, remove it and tighten it. Pay attention to draw all the small ears around into symmetrical lace, and we will tie a beautiful auspicious knot.

13 tie a splayed knot under the auspicious knot, put on a blue and white porcelain bead, and then tie a cow knot, a double knot and a double knot at a certain distance, so that there will be a gap between the three knots under the bead (to prepare for the next tassel);

14 We cut the tassel thread into the same length, and put another one below (the length can be mastered by ourselves);

15 We put the part of the blue-and-white porcelain bead in the middle of the cut tassel thread, pull it up with the following thread, and tie it in the small gap of the three knots below the blue-and-white porcelain bead;

16, be sure to tie the thread tightly and tie a fast knot (everyone must be killed, otherwise it will spread out);

17, we tied a tassel thread to the big gap in the middle of the knot under the porcelain bead, wound it several times, tied the knot, cut off the rope end and fixed it with adhesive.

18, we put the tassels neatly, let the tassels droop naturally, and our Chinese style combined with blue and white porcelain beads Chinese knots will be done.

Method 2:

1, Editing: Beginners need pins and tablets that are easy to insert when they start editing. When knitting, you can fix the thread on the board with a needle, and then press the picture ladle to weave a fixed paragraph.

2, pumping: after the knot is woven, it is only a loose structure and needs to be tightened. However, personally, I think this is the most difficult step in knitting. Because if you can't smoke well, you will waste a lot of time. Here's an explanation for everyone: when pumping, you should first grasp the ear wing to tighten the knot center, and pay attention to whether the thread is kinked, and then adjust the ear wing to make the knot size appropriate.

3. Repair: After the basic knot is finished, some treatment is needed to make it look better and stronger. Hidden thread ends, earrings and beads are several common methods.

4. Sewing: In Chinese knots, except a few that are very strong, such as long knots and parallel knots. Other knots are not very strong, such as Tuanjin Knot and Oxalis Knot. After a long time, it will loosen and become unsightly. Therefore, it is necessary to reinforce the loose parts by sewing or gluing.

These are two ways to make Chinese knots. The small Chinese knot is relatively simple to make and can be completed in a few steps. The big Chinese knot is more complicated to make, but it looks good. At the same time, in the production process, we must prepare the correct materials, and the rope thickness of Chinese knots must be appropriate, not too thin. Otherwise, you can't play the three-dimensional sense of Chinese knots. In order to be more beautiful, we can also embed some decorations such as ceramics and pearls in it.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~