Soft package made of what material

The species, specification, grade, moisture content and anticorrosion treatment of the timber of the wood frame, keel, baseboard and panel of the soft package wall surface must comply with the requirements of the design drawings and the provisions of the "Code for Construction and Acceptance of Wooden Structural Engineering" (GBJ206-83).

Soft package fabrics and other filler materials must meet the design requirements, and should be consistent with the relevant provisions of the building interior design and fire prevention.

The keel material is generally used red and white pine drying material, moisture content of not more than 12%, the thickness should be according to the design requirements, there shall be no decay, knots, splitting, twisting and other defects, and pre-corrosion treatment.

The panel is generally used plywood (plywood), the thickness of not less than 3mm, color, pattern should be as similar as possible, with logs as panels, generally using dried red and white pine, linden and ash and other hardwoods, moisture content of not more than 12%. Its thickness is not less than 20mm, and the requirements of the texture is straight, color uniformity, pattern similarity, there shall be no knots and scars. Distortion, cracks, discoloration and other defects.

The exterior finish with the pressure strip, compartmentalized frame material and wood paste face and other fabrics, generally using factory-processed semi-finished drying material, moisture content of not more than 12%, the thickness should be based on the design requirements and the appearance of no faulty good material; and pre-preserved anticorrosive treatment.

Auxiliary materials are moisture-proof paper or linoleum, latex, nails (nail length should be 2 ~ 2.5 times the thickness of the surface layer), wood screws, wood sandpaper, sodium fluoride (purity should be more than 75%, does not contain free hydrogen fluoride, its viscosity should be able to pass through the No. 120 sieve) or petroleum asphalt (generally use No. 10, No. 30 construction of petroleum asphalt) and so on.

If the design of lightweight partition wall practices, its grass-roots level, face and other filler materials must meet the design requirements and supporting the use.

Covering materials and practices must comply with the requirements of the design drawings, and in line with the relevant provisions of the building interior design fire.

Soft package is a kind of indoor wall surface with flexible materials to be packaged wall decoration method. It uses materials with soft texture and soft colors, which can soften the overall spatial atmosphere, and its deep three-dimensional sense can also enhance the home grade. In addition to beautify the role of space, more importantly, it has a fire-retardant, sound-absorbing, sound insulation, moisture, mildew, antibacterial, waterproof, oil, dust, dirt, anti-static, anti-collision function. Previously, the soft package is mostly used in high-end hotels, clubs, KTV and other places, not seen in the home. And now, some high-grade neighborhoods of commercial housing, villas and row houses, etc. in the decoration, will also be used in large areas.

Commonly speaking: soft package is in some families in the bedroom bedside background wall that piece of bulging stuff, soft

In the ktv is more common. Not just walls, ceilings, and some even corridors have

In the soft packages can be divided into three categories,

One, the conventional traditional soft packages. Construction process: the first base plate (9% or 12% board) paved, and then the top plus a layer of 3~5CM thick bubble wipe pad, and then use fabric or artificial leather or leather trim (package) surface.

Two, type strip soft package. Construction process: first of all, the type of strip according to the need for graphic fixed in the wall, the center filled with sponge, and finally use the plug knife to plug the cloth or leather in the type of strip.

Three, leather sculpture soft package. Leather sculpture soft package is a new type of soft package. It is molded with a special mold by high temperature hot pressing. Novel style, flame retardant and wear-resistant.