How to make smokeless firewood stoves with red bricks

1. First, according to the size of the pot you want to build, draw the framework of the whole stove where you need to build it. According to the red brick, cut a circle around the border with a depth of 3 cm to prevent cracks from appearing at the bottom after burning. Then rinse with water and start laying bricks. Bricks are tiled, and a single brick is enough. Remember to leave a stove mouth in front, put a dust leakage net about 25 cm high at the bottom of the stove, and start to take a smoke outlet behind the 6-story brick.

2, build by laying bricks or stones, according to their own suitability to determine the height of the stove, smoke outlet according to the environment, the outlet should be in the downwind, outdoor construction should not be less than one meter of the stove.

3. Then build a pot. The pot is two centimeters higher than the stove, and the front stove mouth and the smoke outlet are the same size.

4, seven or eight centimeters on the ash leakage net, the overall modeling build by laying bricks or stones, square, cementing tile. After finishing, put it in the air for half a day and smoke the stove. In the meantime, sprinkle some cockroaches on the whole stove to prevent it from cracking. It takes about an hour to smoke, and it takes two days to sprinkle some ash irregularly.