How to build wood-faced wallboard

The construction steps of wood-faced wallboard are as follows: 1. Prepare tools and materials: wood veneer wallboard, woodworking glue, nails, hammers, electric drills, woodworking saws, rulers, pencils, corner lines, etc. 2. Clean the wall: clean the wall to ensure that the wall is flat, dry, free of dust and oil. 3. Measure the wall size: mark the installation position and size of wood-faced wallboard on the wall with a ruler and pencil. 4. Cutting the wood-faced wallboard: use a woodworking saw to cut the wood-faced wallboard into appropriate sizes according to the size requirements. 5. Wood glue coating: evenly coat wood glue on the back of the wood-faced wallboard to ensure uniform glue coating. 6. Installation of wood-faced wallboard: Stick the wood-faced wallboard coated with woodworking glue on the wall according to the marked position, and gently tap it with a hammer to ensure that the wood-faced wallboard is close to the wall. 7. Fix the wood veneer wallboard: fix the wood veneer wallboard on the wall with nails to ensure that the nails are not exposed on the surface. 8. Install corner lines: Install corner lines between the wood-faced wallboard and the corner to ensure that the corner lines are closely attached to the wood-faced wallboard. 9. Finishing: After the installation of the wood-faced wallboard, clean the glue and dust on the wall and the surface of the wood-faced wallboard to ensure that the wall is clean and beautiful. Note: 1. Before construction, make sure that the wall is smooth, dry, free of dust and oil. 2. When installing the wood veneer wallboard, make sure that the wood veneer wallboard is close to the wall to avoid cracks. 3. When fixing the wood veneer wallboard, make sure that the nails are not exposed on the surface, so as not to affect the appearance. 4. When installing the corner line, it is necessary to ensure that the corner line is closely attached to the wood skin wallboard to avoid cracks.