What is the plastic insoles wrapped edge embroidery method, how to embroider plastic cross stitch insoles?

Plastic insoles wrap around the edge embroidery method has the following five steps, adding edge, stuffing the bottom, embroidery pattern, pair of needle embroidery, cut insoles. 1. That is, in the bottom of the cushion edge around the Na two circles of thread. For the sake of aesthetics, the color of the thread should be different from the color of the bottom. 2. Stuff the bottom. The place where there is no pattern is first stuffed with color thread, which is the bottom color. In the process of embroidery should be in accordance with the order of the first outside and then inside to Na? Embroidery around the insole in a circle. The width of a needle is very small, and the distance between the stitches should also be very small, the purpose is to be strong and durable. 3. Start embroidering the pattern. The first step is to outline the pattern with colorful threads. Match the threads used with each other according to each person's preference. However, the line of the outline should be distinguished from the line of the stuffing pattern, otherwise the embroidery will not be conspicuous, and the beautiful effect will be lost. The second step is to fill the inside of the pattern with color threads. It is still necessary to follow the principle of first outside and then inside, embroidering in a circle. If you don't follow this principle, the density of the embroidery will be big or small, unevenly sparse, affecting the quality. It takes about one week to embroider a pair of insoles, or three days for the fast ones. 4. In the process of embroidery, the most difficult point to grasp is the "needle embroidery". Both sides of the embroidery method must be the same. That is to say, the needle must be inserted vertically when it is threaded in, otherwise the stitch on the other side will not be neat, and thus can not be carried out. In this process, the tools used in addition to various types of embroidery needles, there is an indispensable thimble. The thimble, mostly of iron, round, with many regularly arranged dots, is generally carried on the middle finger of the right hand. Because the thickness of the insole and the mesh is relatively large, it is not strong enough to poke it with your hand alone, so when you can't poke it in, you will put the needle nose on the concave point, and then you can easily put the needle into the insole. 5. After embroidering the insole, the most crucial part is to cut the insole. The tool used is very simple, a hobby knife can be used. At the point where the two insoles are fixed together with the mesh, use the knife to cut down slowly. When cutting, the force should be even, the knife should be sharp, and even more careful, otherwise, it will be uneven. Therefore, people with very good embroidery skills may not necessarily have good knife skills. It takes about twenty minutes to cut a pair of insoles.