What are the installation methods of chimney in fireplace?

Installation method of fireplace chimney: If you want to use the original indoor fireplace flue, the fireplace should be connected to the chimney with stainless steel flue pipe or cast iron flue pipe with the same diameter as the fireplace flue, and ensure sealing. Chimneys should be kept in good condition, without damage or blockage. If the original fireplace chimney in the room is not lined, it is recommended to install a pipe lining with an inner diameter of 150 mm that matches the fireplace inside. The pipeline should be able to ensure that the pipeline gas and flue gas can be discharged from the furnace. If there is no fireplace flue in the room, please install a metal smoke pipe, and the overall height of the chimney is not less than 3.6 meters. Try to use as few elbows as possible for chimneys, and it is recommended not to use 45-degree or 90-degree chimney elbows for connection. If the fireplace chimney is to pass through the ceiling, attic, wooden roof or decorated wooden wall, it should be insulated. The chimney outlet should be windproof and rainproof.

Note: All chimneys are sealed with high temperature resistant cement or bonded glass fiber rope. Flammable materials are strictly prohibited for decoration around all chimneys. Put the fireplace in place smoothly, after ensuring that the chimney has been installed correctly, open the package, install the upper decorative strip and the lower air inlet baffle in the clamping position, open the oven door, take out the spare screw package and operating tools in the ash hopper, and then put the ash hopper back into the furnace.

?