What's the difference between natural seam and craft seam of wood veneer?

There are the following main differences between natural seams and technological seams of wood veneers:

1, the difference in practice: for the beauty of the gap, the notch or protrusion deliberately processed along the edge of the wood skin through a certain process is called a process seam. Without any modification, the cracks naturally left during installation are called natural cracks.

2, the difference in the effect of use: Wood veneer is to stick a 3 cm decorative board on a 9 cm bottom plate, and then fix it with mosquito-repellent incense nails. This is the practice of some high-end decoration now. Wood bark has various natural textures and can be used in various shapes. The use of craft seams can bring gorgeous effects to the interior. The natural seam decoration effect of wood veneer is more natural and smooth.

3, the difference in appearance: the edge of the veneer stitched by the process is called a gap or a protrusion, which is deliberately processed by a certain process, and the gap is beautiful. Natural joints are untreated cracks.

Extended data

If the veneer is too long, too wide and too high, it will cause problems such as arching, cracking and dislocation. These are the normal deformation of wood products with slow humidity, and the deformation increases with the increase of unit body. Therefore, in the production of wood veneer, a large area will be divided into smaller units, and these units will be excessively connected by leaving gaps.

Advantages of using finished wood veneer:

1, the cost is easy to control: wood veneer can be mixed in the factory to control the cost of raw materials.

2. Improve the decoration taste: unified design in style, unified arrangement in size, and the overall effect is more harmonious and beautiful. It is easy to improve the taste of decoration and achieve perfect results.

3. The construction period is greatly shortened: the factory production time of wood veneer products is short, which reduces the operation links in the construction site and simplifies the technological process.

4. Meet the requirements of environmental protection: because all the decoration parts are produced in advance, a lot of on-site painting and bonding work is reduced, and indoor air pollution is greatly reduced.

5, a wide range of applications: the finished veneer can be used indoors and outdoors, which is very beautiful and fashionable.

References:

Baidu encyclopedia-finished wood skin