How to make your own miter table saw

A **** has six steps. The first step starts with preparing a piece of scrap wire and stripping off the outer skin. The second step, the line will be welded to the position of the positive and negative poles of the motor respectively. The third step, use a round gauge to draw a circle on the scrap metal, the diameter size of the circle can be determined according to their own cutting requirements. The fourth step, the cut round tin further cut into the usual common sawtooth shape, the center of the drilled holes, with a screw with a nut through and fixed on the screw. Step 5, after making a table saw tabletop with cut-outs from boards, glue two small boards to pad up the sides underneath. Step 6, connect the parts in series, and then use a hot melt gun to fix the motor, a homemade miter table saw is finished.