Traditional Culture Encyclopedia - Traditional customs - How to install the water purifier under the kitchen?

How to install the water purifier under the kitchen?

Installation method of water purifier under kitchen:

1. Turn off the main tap water switch, install stainless steel tee and ball valve at the inlet position, and connect it to the water inlet of the water purifier with PE pipe. Connect the flushing port with a pe pipe about 15cm, connect the plastic flushing ball valve, and then connect the PE pipe with an appropriate length.

2. Open the fifth-stage ultrafiltration device, take out the sealed ultrafilter from the fittings, install it in the ultrafiltration device, and tighten it with a plastic fastening wrench.

Third, check and turn off the cooling and heating switches, plug in the power supply and start flushing. When there is no black water in the flushing port, close the ball valve.

4. Open the submarine sewage outlet (soft plug+nut) of the cold and hot bucket and wash it for 25-30 minutes in turn until there is no small white foam in the effluent.

5. Screw on the drain nut, turn on the hot and cold faucet and let out a little water. (Note: Only when there is water flowing out of the hot water port can the heating switch be turned on to prevent dry burning).