How to set nvme hard drive boot in BIOS in win10?

Let the BIOS recognize and boot this hard drive, please ask for the specific process, Shenzhou Ares Z7 series

The motherboard does not flash the BIOS, and clover is used to boot the nvme disk as the system disk. User 63126609551-21 11:58 The motherboard does not flash the BIOS, and clover is used to boot the nvme disk as the system disk.

I bought an m2 hard drive. Since my motherboard is P8Z77_V LX, which does not support the nvme protocol, flashing the BIOS is useless. I had to use clover to boot the nvme disk to build the system, which was successfully completed.

The following is my experience sharing, and I succeeded after reading Xiaofeng’s post.

[Tutorial] Let X58 and other non-UEFI BIOS motherboards use the UEFI system and NVMe (NVMe BIOS-free BIOS method)? The above is a post from xiaofeng Dashente on Baidu. I would like to add that after making the clover boot disk, you need to check it.

After the production is completed, we open the U disk and find the NvmExpressDxe-64.efi file in the \EFI\CLOVER\drivers-Off\drivers64UEFI folder. Copy it into two copies and place them in \EFI\CLOVER\ of the U disk.

drivers64 and \EFI\CLOVER\drivers64UEFI folder.

The above step is the key to starting uefi, so everyone must check whether the copy is successful.

This is my m2 SSD and riser card model.