Pedal installation method

1, if you buy from a treasure, you must buy the one with high sales volume, and the owner will print out the pictures so that the store can take pictures better.

2. After buying it, I am fully capable of installing it myself. Because there is a reserved hole, I really don't have time to go to the garage to install it, but it is estimated to cost 60 yuan.

3, install it yourself, find a flat cement floor, and watch the surrounding safety. It is good to use the pedal paper shell installed by the seller. Spread out and lie down There's plenty of room down there, so you can put your hand in it.

4. The original pedal, the bracket near the rear wheel, has only one screw hole. If possible, you can drill your own holes and install screws. If not, it is not a big problem not to make holes. Even if you step on it, you can hug it, and it will move 1 cm, which will not affect the use. Virgo suggests drilling.

5. Install according to the product instructions. Loosen the screw first, but don't remove the nut at the back. Install the pedal gasket at the appropriate position of the far pedal. Turn all brackets inward and tighten the screws diagonally. Step on the pedal gasket to ensure that the installed parts are not loose. Most vehicles may need to drill holes by themselves, so it is necessary to mark the original pedal first and then drill holes according to the empty position of the screws on the pedal.