What material is used for floor self-leveling?

Self-leveling adopts epoxy floor coating, which is mainly made of curing agent such as epoxy resin. After pouring on the ground, the ground is leveled by manual driving and the height of the terrain. However, when encountering large slopes and large grooves, manual plastering is needed.

What are the construction steps of home improvement floor self-leveling?

1, foundation treatment. Before we self-level the ground, we must first deal with the base. For example, there are water pipes on the ground, and the conduit should be arranged in advance. Ensure that all the ground construction is completed before the ground inspection. If there is sand and powder on the ground, I personally suggest that you repair it with cement mortar after chiseling. If there is only dust, you can brush a layer of ground to deal with it. There is also a good material, which is leveling with epoxy sand, and the effect is better.

2. Construction of primer. After the base treatment is completed, the primer construction can be carried out. There is a key to primer construction, that is, the ground must be kept clean and no dust is allowed. Then the main material, namely the self-leveling main material and the curing agent, are matched in proportion and fully stirred evenly. After that, primer construction will be carried out. Primer construction must be uniform to ensure that there is no missing brush.

3. Construction of intermediate coating. Intermediate coating is the main component of self-leveling material, which is generally composed of resin glue and epoxy sand. After fully mixing the materials, spread the self-leveling materials evenly on the ground with a scraper. It should be noted here that the self-leveling material after stirring should be used up within 30 minutes. Then after the intermediate coating is completed, it should be cured for more than 8 hours.

4. Construction of surface coating. Surface coating is the last layer of self-leveling, and it is also the embodiment of the final effect of the surface. In fact, the material of the surface layer is basically the same as that of the intermediate coating. After the main agent and curing agent are mixed evenly, the construction is carried out by using the inherent technology of the material. Some fall directly to the ground, and then self-leveling is completed on the surface with a scraper. It should be noted that the surface layer should be cured for more than 72 hours.

Can I use self-leveling in home improvement?

1, home improvement can be self-leveling. Self-leveling is widely used because of its characteristics of safety, no pollution, beautiful appearance and fast construction and put into use. Self-leveling can not only be used in industrial plants, workshops, warehouses, commercial shops, exhibition halls, gymnasiums, hospitals, various open spaces, etc. , also suitable for home, villa, warm small space, etc. In addition, it can also be used as decorative surface and wear-resistant substrate.

2. Self-leveling cement is a high-tech green product with high technology content and complicated technical links. Moreover, self-leveling is a dry-mixed powder composed of various active ingredients, which can be used in the construction site as long as water is added and stirred.

3. Self-leveling ground means that self-leveling materials will become free-flowing slurry after adding water, which can be quickly spread on the ground according to the roughness of the terrain, so as to obtain a flat ground with high flatness.

4. Self-leveling construction is very fast and simple, which is incomparable to traditional manual leveling. Self-leveling scraper can get a high level of base surface after a little spreading, and the self-leveling hardening speed is very fast. People can walk on it in about 4 to 8 hours, and follow-up decoration works can also be carried out, such as floors and tiles.

5. Self-leveling is made of solvent-free epoxy resin, curing agent and conductive powder. Its surface is very smooth and beautiful, thus achieving a mirror effect. In addition, self-leveling is also very wear-resistant, compression-resistant, impact-resistant, and has certain elasticity.

6. Self-leveling should be stored in a dry and ventilated place at room temperature. Self-leveling should try to avoid direct contact with skin _ eyes.

7. The price of self-leveling is generally per square 40 yuan. After the self-leveling construction is completed, people can walk on it after 3 days and cars can drive on it after 5 days.