How to install water pipe connector in washbasin

Installation method and steps of washbasin water pipe joint:

1, first take out the all-copper fixed base;

2. Turn the nut counterclockwise from the threaded pipe;

3. Wear a yellow wrench, nut, threaded pipe and silicone pad on the hose;

4. The hose passes through the vessels to be installed, such as the sink and basin, and the silica gel pad is placed on both sides of the vessel installation place. Finally, it can be fixed more firmly by tightening;

5. Screw the small end of the hose into the water inlet of the faucet by hand until it can't be screwed, and don't tighten it with other tools;

6. Screw the threaded pipe into the lower side of the faucet and container;

7. Fix the faucet with nuts, tighten the nuts and complete the installation.