How to assemble a folding wardrobe

Many single men and women will choose folding wardrobes as temporary wardrobes, and the wardrobes need to be assembled by themselves when they are bought, which worries many people. How to assemble this simple wardrobe? First of all, you need to know the instructions of the wardrobe. Let's assemble it according to the steps described by Bian Xiao! 1. Equipment installation: Some steel pipes in cloth wardrobe are marked with numbers, which can be put together with the numbers. Bottom installation and dry installation of 1. board. 2. Classification of plates, such as top plate, bottom plate, side plate, neutral plate, laminated plate, etc. 3. Place the sorting board. For example, the top plate is on the upper side plate and the bottom plate is on the lower side plate. 2. Installation: 1. When installing, the cabinet faces down, and the installation starts from left to right or from right to left. 2. After assembling the panel, please ensure that the diagonal error of the cabinet is within plus or minus 1 mm.. 3. After the diagonal measurement is completed, please mark the position of the laminated plate or riser to be nailed on the two side plates (side plates) to facilitate the nailing of the back plate. 4. After the cupboard is put away, please measure whether the cupboard is level with a spirit level. If not, please adjust to the horizontal position. The common method is to put something under the cupboard. 5. After the cabinet is horizontal, it can be installed in turn: clothes rail, drawer, door panel or sliding door. After the rearview mirror is telescopic, the handle can be installed as needed. Process: 1. Find out the parts of the chassis and assemble them. Note that it is only the bottom part. Some have shoe racks, which should be installed first. Note that the second step is not to put all the remaining shelves on, but to put the cloth on first. Open the zipper of the cloth, and the sticky place in the middle is also opened, with the bottom facing down. Some small holes were dug at the bottom of the cloth. According to each hole, pull down the cloth from top to bottom and along each vertical tube. You can put it at the bottom first. 3. Put the remaining pipe in the cloth, then pull it up and cover the top of the pipe until the cloth looks flat and wrinkle-free. 4. Our installation is finished. Note: Some of them are plastic joints, and sometimes they are a little tight. Please don't insert it by force, or it will crack carelessly and there is no place to buy accessories. Don't screw down the last one, it will bring difficulties to the later installation. First, install all the shelves loosely, and then tighten all the screws with a screwdriver. So you can get a strong cloth wardrobe!