Where can I use honeycomb activated carbon?

Features of honeycomb activated carbon products: It is widely used in various organic waste gas purification systems with low concentration and large air volume. The treated waste gas can fully contact the activated carbon when it passes through the square holes of water-resistant activated carbon. The adsorption efficiency can reach 67. 16%, and the resistance coefficient is small. It has excellent adsorption and desorption performance and aerodynamic performance, and can be widely used for purifying and treating water-containing waste gas. Environmental protection equipment using water-resistant activated carbon has the advantages of high waste gas treatment and purification efficiency, small adsorption bed volume and low equipment energy consumption, which can reduce the construction cost and operation cost, and the purified gas completely meets the requirements of environmental protection emission. Performance parameters: there are two kinds of water-resistant activated carbon: water-resistant and water-resistant. All indexes and parameters are the same, and the specifications can be produced according to customer requirements. Conventional100 *100 *100 mm, 50 * 50 * 100mm water-resistant activated carbon.

1, characteristics of water-resistant activated carbon products? Water-resistant activated carbon has relatively large surface area, microporous structure, high adsorption capacity and high surface area, and is widely used in air pollution control. Water-resistant activated carbon adsorption method is selected, that is, the waste gas contacts with porous activated carbon with large surface area, and the pollutants in the waste gas are adsorbed and decomposed to play a purification role. Water-resistant activated carbon can remove pollutants in different degrees:

2. Description of the use of water-resistant activated carbon: Water-resistant activated carbon is used to control air pollution. It consists of two parallel adsorbers, which can be used to treat intermittent exhaust and some can be used for continuous exhaust. One adsorber is used for adsorption, the other adsorber is used for desorption regeneration, and the desorbed pollutants are discharged after catalytic combustion. When using water-resistant activated carbon, high temperature should be avoided as far as possible, because high temperature will reduce the adsorption capacity and the adsorption effect will decrease due to the increase of temperature. At the same time, high dust content in gas should be avoided, because tar dust fog will block the pores of activated carbon, increase wind resistance and reduce adsorption effect. In this case, dust filter should be installed before waterproof activated carbon to improve efficiency and service life.

3. What are the technical parameters of water-resistant activated carbon? Main ingredients? Activated carbon? Normal compressive strength? Above 0.8MPa? Common specifications? 50*50* 100mm、 100 * 100 * 100mm？ With temperature? Below 400 degrees Celsius? Hole density? 100 hole/square inch, 150 hole/square inch? Empty tower wind speed? 0.8 m/s? Specific surface area? More than 700 cubic meters/gram? Appearance? The product surface is smooth and crack-free. Note: Other specifications can be produced according to user's requirements.