What floor slab for steel structure

Steel structure with cast-in-place reinforced concrete floor slabs, characterized by thin floor slabs, less steel, the floor surface is smooth and beautiful, but the site work is more, the need to support the template project can not effectively realize the assembly of the floor, compression steel plate concrete combination floor slabs are used as a permanent template of cast-in-place concrete compression steel plate, overcoming the cast-in-place reinforced concrete floor slabs of layers of supporting the mold, the disadvantages of cumbersome construction, the steel truss floor is the steel bars in the factory processing into a steel shoe frame, the bottom and the bottom membrane is integrated to form a combination of templates, the stress is simple and intuitive. The steel truss floor joist is processed into a steel shoe frame in the factory, and the bottom is connected with the bottom membrane to form a combined template, which is simple and intuitive, provides rigidity for the template in the construction stage and is subjected to the force in the use stage, so it is very fully utilized and greatly reduces the on-site tying of reinforcement bars, which is conducive to the mechanization of the production.

What are the advantages of steel structure house

1, light weight, strong bearing, large span

Being compared with the traditional reinforced concrete brick house, the steel structure is light in weight, but the bearing capacity is very strong! The same layout of the house its own load is only about 1/3 of the former, but the carrying capacity is similar. Not only can it reduce the requirements for foundation, but also more convenient for transportation and construction.

2. Uniform steel material, good plasticity and toughness, and high seismic performance

The standardized production in the factory predestines that the load-bearing components of steel structure are made of uniform material, and the stress performance is close to each place, and it will not be easy to be defective due to human factors like reinforced concrete. Good plasticity of steel components, not because of accidental overload or local overload and sudden fracture damage. Good toughness, then the steel structure of the power load adaptability.

3, industrialized production, easy to manufacture, high precision

A large number of steel structures are manufactured in specialized metal structure manufacturing plant, production is simple, high accuracy. The manufactured components are transported to the site for assembling and are connected by bolts, which is convenient for construction. In addition, the completed steel structure is easy to dismantle, reinforce or remodel.

4, construction and installation cycle is short

Beams, columns, wall panels and roofs are assembled and installed, only need to pour reinforced concrete in the floor, construction speed, compared to the traditional houses that can only be built in a year and a half, the construction period can be shortened by more than 2/3! 300 square meters of the house, 5 workers can easily get it done in 1 month!

5, energy saving and emission reduction, belonging to the green building

Walls using lightweight energy-saving standardized prefabricated wall panels instead of clay bricks, sand, stone, cement, water use less, more than 80% of the materials can be recycled to save energy and protect the environment, especially in the construction site, the pollution is lower.

6, flexible decoration

The steel structure itself has a natural sense of heaviness and decorative, without other materials bare that can hold up the face, and then with other decorative elements, modern!